G.Skill Ripjaws V Series 32GB (2 x 16GB) 💪 DDR4 3600 CL16-19-19-39 1.35V Dual Channel Desktop Memory Model F4-3600C16D-32GVKC Review

It started up without problems according to the declared XMP profile (3600, timings 16-19-19-39, voltage (1.35V), tests in Memtest passed without errors. I managed to overclock to a stable 3900 at (1.39v) in timings 17-21- 21-41 Memtest without errors, because of the high altitude and low overclocking, I returned it back, I bought it for 10,500.

The cheapest and best option on the market with such timings. Pros: Excellent and fast memory with timings in 16 CL. Installed on the mother of GIGABYTE Z390 AORUS PRO WIFI. Worked great without a bios ate. Not very hot. 10 year guarantee! With its cons: There are no XMP profiles for intermediate frequencies. If the motherboard does not support the frequency of 3600, then you will have to configure everything manually.

Xmp, with only one bar, keep in mind. Looks like the CPU of the processor cannot work at such a frequency, with two 2 rank bars. From rank 1 everything is fine. I had to lower it to 3466, at the same timings. Perhaps on other CPUs, it will be normal.

I bought this miracle, because. looked at a friend. I, apparently, came across a worthless kit that refuses to work stably at a frequency above 3333. The MSI Tomahawk motherboard is confident in its hardware. Tried to contact the seller, well, as usual - without results. They said "The manager will contact you during the day. " Several days have passed. Total: 1. Elmall - shaChina's office. I don't recommend buying anything from them. For worse than the same 2. There are bad kits. Buy at your

Different pros: ICE. With ryzen 5 5600x on msi B450 a pro max flew to 3600, even xmp did not touch in bios. I didn’t look at any chips from Samsung, and it doesn’t matter, because I don’t think about overclocking. Got cons: The price tag (for 18), but perhaps better than how I took 2x16 3600 wipers with cl18 for 10k twice and returned them both times, then the frequency was not even taken at 3200, then in general the strips did not want to work together

Launched via XMP (DOCP) in BIOS via AI Tweaker. Timings on the profile rise like native - 16-19-19-39/1800/3600/1.35 In the memory information through the Ryzen Master utility, you can see that Fabric Clock = 3200. Pros: Fast, cold, relatively inexpensive XMP/DOCP profile is automatically picked up Climbed into the first slot for the cooler, despite the fact that the bars are not low-profile Got cons: One of the bars suddenly died after a month and a half of use in a configuration with an Asus

Excellent RAM. Works great with Ryzen 5600x and B550 Aorus Pro (BIOS version F12). XMP is enabled and the memory works according to the published specifications without any problems. Unlike most 16GB flash drives on the market today, they are dual rated. I originally wanted to get Crucial Ballistix, but in the last few months I've found that even they've moved up a rank.

G.Skill Ripjaws and Trident are the best memory you can buy. If you want unmatched performance and don't care about RGB, this is for you. You can get this DRAM with a red heat spreader if you want to add some color. Note that these sticks are a bit tall, so check your clearances if you're using one of the larger CPU coolers.

Excellent timing for price and capacity. Installed on my asus x570 tuf wifi from 3700x. Switched to the xmp profile for RAM and it loaded immediately. In Tarkov RAM speed and timings are very important on a card like Reserve, it easily increased my FPS by 20+ or more without changing anything else. I've upgraded a few Corsair Vengeance 3000's. Not just for Intel!

It took me a long time to find memory that would work well with my AMD Ryzen 3900X but these work great. I have an Asus AMD AM4 TUF X570 Plus board and it works great. I can even enable DOCP for automatic full advertised rate. They say the 3600 is the best place for the money for the Ryzen 3000 series. It was also listed on the QVL list for my board, so that was reassuring.

I bought this RAM for 3600MHz. However, on my X570 Aorus Ultra (which has been confirmed as QVL-listed) it can hit 3200MHz at best, and it didn't go any higher when I tried to set the timings manually. I will be in touch with gskill shortly as this is totally unacceptable. Edit: I tried contacting the company and they proved unhelpful in any way and wanted to force me into an RMA con. Avoid this Aries at all costs.

Doesn't run at XMP 3600 speed on MSI AMD B450 with Ryzen 3700x. The system kept crashing and rebooting even when I added more excitement and manually adjusted the timings. I could stabilize it if I slowed down to 3400, but I didn't even believe it. To be honest the memory passed the 6.5 hour Memtest86 overnight so I don't think the RAM was bad, just incompatible. Thought I'd give it a try based on the price, decent time, and other reviews, but if you're using Ryzen I'd avoid the hassle. I ended

Product works great. Very fast and big noticeable difference between my 2400 RipJaws I used before. For people saying this doesn't work with the Ryzen platform, I'm not exactly sure what issues they had, but with my Aorus Pro WiFi X570 and Ryzen 3900x it literally plugged in and worked and was running XMP No what increased to 3600 no matter what questions. Although it's priced lower than most other brands and sellers, I still find it a bit overpriced (as with all computer hardware in my…

I bought this kit for use with an MSI x570 Tomahawk 5800x motherboard. The sticks were plug and play and worked as listed from a jump set to an XMP profile. They worked fine while I had them until one day I started getting a bunch of WHEA errors and games crashing. A large set of Prime95 and launching TM5 started crashing due to memory pressure while before everything worked fine. After shutting down and rebooting, I was greeted with a blank screen and the system was not sending any messages…