💡 Enhanced Performance: Waterproof Illuminated DPDT On-Off-On Rocker Switch - Double Pole, Double Throw - 3 Position Review

No instructions other than bridging certain terminals if you want the lights to work, NOTHING else and because it happened. The UPS store is 40 miles away, according to the USPS.

Switch has internal wiring reversed, support advice was less than helpful. After some bugs and errors I managed to get it the way I need it. However, when the switch is in the down position, power is supplied to the top terminals, and when the switch is up, to the bottom ones. .

The light doesn't work when you follow the instructions. Nice switch once I figured it out. Take 1B to 4B and 2B to 5B and you need to connect ground to 1A and 5A if you want the bulbs to light when the switch is turned on. Be very careful when cutting the hole for the switch. Make sure the corners are rounded or holes are visible in each corner of the switch. I would give 4 stars if the instructions were correct. Too expensive for this switch.

So I have this to switch between 2 power supplies, a 12vdc power supply and a 12vdc lithium battery. When connected according to their instructions, the chain of light will return to the opposite chain. So I just turned them off. Wow. In both cases the switch will handle 30 amps at 12-15 VDC, however there is a voltage drop across the switch. For example, if the battery voltage under load is 12.9 VDC, the switching voltage will be 12.1 VDC. (I have a pressure gauge on the switch) I also checked

The switch arrived quickly and securely packaged. Exactly what I expected when I ordered it. It seems very durable; The action seems reliable. Just responding to comments in some other reviews: I had no trouble connecting this switch. It's a DPDT switch so you know the 6 pin function is obvious. Considering that it has 2 LEDs, the function of the other 4 pins also becomes clear. The switch came with brief instructions and a simple circuit; Both were helpful. But I think this switch connects…

Great switch, terrible instructions. Bulbs are standard halogen, not LED. I've attached some schematics to help people in the future. Note that the wires are numbered 1-5, which are printed on the plastic on the bottom of the switch. I take no responsibility if you follow my connection guide. Use at your own risk. There are 2 banks, upper and lower, which can be colored red or yellow. The central part is switched off. Pin #3 is designed to deliver a positive charge from the battery. Pins #1 are