🔆 HERCOO 2002-2006 Dodge Ram 1500 2500 3500 Compatible White LED Light Bulbs for Instrument Gauge Cluster Speedometer Review

Works as described. A piece of advice: don't use the Flathead if you keep slipping. Take the tip of the needle and twist it. I had to push a little to put the new ones in, it may not look like it will rotate but it does. Do not fully assemble before testing. Connect it. Try it, snap a photo for reference, and then take it off and rotate the bulbs that are still off 180 degrees.

Very difficult to install as the lights are polarized and impossible to know which way they are going without installing the lights and partially reassembling the sensor. I had to do this several times. The lights were too strong and after 6 months they are now flashing. At night, the flashing lights make the truck practically inedible. Dimming will slow down the flash, but the rest of the dash and radio will turn off.

There were difficulties with the installation, since they do not have direction indicators. Some I guessed correctly - some had to be taken out and put in. This is a real pain in the ass. The description says they are dimmable and really dark, but even with the lights off they still shine brighter than I would like for night driving. Not sure if they have something to do with my gear indicator not working after installing it? I'll be switching to standard bulbs soon.

So far, check after installation. Dimmable LEDs, I have white and it's light blue due to the panel's factory tint. As stated in the product description! Now for the polarity of these lights. The factory lights have a recessed dot, which is a plus, and these LED bulbs have the manufacturer's logo on the plus side. Installed the first time, didn't have to unplug again to switch polarity, hope this will help many of you install it once.

Very easy to install if you know what you are doing. It took me a little over 30 minutes from start to finish. Remember, if some of them don't light up, rotate the bulb 180 degrees and it should work. As with any project, make sure you have the right tools. All you need for a 2003-2005 Ram is a shorter Phillips screwdriver and needle nose pliers. UPDATE: Lights started flickering now ONLY after warranty expired. The bulbs are bright but I expected them to last longer since they are LED. My old…

These LEDs really brighten up the dashboard. I bought white LEDs and they glow blue through a 2004 Dodge Ram 1500 SLT (since there is a blue tint on the panel overlay). Disassembling the dashboard was the scariest part. Installing the lamps wasn't too difficult though. I wish I knew how to light up this dyno panel without plugging it back into the car to see which bulbs don't light up. However, I plugged it in, took a picture with my phone to see which bulbs weren't lit, and rotated those bulbs

So I bought these for my 2006 Dodge Ram 1500. I watched a few videos on YouTube and it was all pretty easy. In fact, removing the cluster panel was a lot easier than it seemed! So let's get to an overview of these LEDs. I have Ice Blue and they look really good in daylight. I can't wait to see her in the dark tonight. The reason for the 4 stars is because they do NOT dim. The site says they are dimmable! I freaked out when I installed them and they lit up and then immediately turned off. It…

The cool white backlight installed and the new aqua color on the display are stunning. Was pleasantly surprised by the custom look of these LED lights added to my 16 year old Dodge Ram 1500. Videos online that make this task fairly easy, but note that LED replacement bulbs are polarity sensitive. After reconnecting the instrument display, check and make sure that all displays are working. Rotate the lights 180* on the ones that don't light up. This should fix any lights that weren't on. The…