🔵 Blue Filter Housings for Housing Brackets Review

Nice heavy mount. When you buy the corresponding filter, please pay attention! There are no screws to attach the filter to the filter bracket. You will need four 1-1/4" long, 5/16" diameter screws to attach the filter to the bracket. I used zinc plated hex head screws. I then found at Lowe's. The hex head allows you to use a wrench or ratchet and socket to tighten them. No drilling or cutting required. Simply insert directly into the pre-drilled holes and tighten. Just attach them without…

I just installed a complete water filtration system for my whole house. I have only used Pentek filters and housings. I'm very happy with the performance of my system and how well everything went together. Here's a breakdown of all the components I used in my system. I've spent a lot of time researching what works and found that getting familiar with each Pentek filter and their features wasn't easy. The aim was to reduce the amount of sludge, iron deposits from old iron pipes and remove any…

This mount will not work with other manufacturers filter housings. Sizes are shown in my pictures. FYI, I think the part is in metric units. The small holes appear to be 1 cm in diameter and the large holes appear to be 2 cm in diameter. There is a longer side and a shorter side. The metal is about .110" thick with white paint. It's (my best guess) 12 gauge sheet metal. I measured the thickness with a digital micrometer from a popular import tool store. I love clean water. old solder joints…