Description of Hromee 1/2 Inch Air Compressor Filter Regulator Combo With Pressure Gauge, Water Oil Trap Separator And Semi-Auto Drain For Effective Filtering
BRASS FILTER ELEMENT - Filtering moisture and fine particles to get clean and dry air which prevents damage to air tools, spray guns and pneumatic equipment. The 5 micron brass filter element provide higher efficient filtration and long lifetime than the fiber one. AIR REGULATOR - With the adjustable pressure control knob, you can pull up and turn the black knob to set the desired pressure. No matter how the inlet pressure and flow fluctuations are, it always can maintain a stable outlet pressure. SEMI-AUTO DRAIN - The air filter regulator is equipped with a semi-auto drain that means it will drain accumulated liquids automatically when there is no pressure. Take care of the MAX drain level on the bowl and always keep the liquids below the line. PRESSURE GAUGE&BRACKET - The pressure gauge is more accurate to the pressure induction and the metal shell is resistant corrosion. The dial scale has two units of measurement: psi and bar. The Max pressure is 150 PSI. The bracket is designed to provide a secure way to mount a filter regulator and easy removal. METAL COVER- The metal cover is designed the style of hollow-carved not full covered that not only protective the cup but also make you can see the inside of the bowl through the side. 2×1/4” double male fittings can transfer the female fittings in the filter into the male fitting to connect. Please use teflon tape to ensure tight connect before using.