🔌 Ideal Orange Power Plug Luminaire Disconnects, Pack of 5 (Model 30-682) Review

Our CFL can lights keep burning out. They are imposed on us by ecological laws. To replace them with modern LED lights you need to bypass the cfl ballast and use one of these connectors. They say to use the 18 gauge wire I ordered, but 14 gauge will do. They go perfectly with the new LED lights.

I have used these connectors to make LED and GU10 power supplies. The GU10 bulbs I use are LED so their wattage matches the 4" fixture I have, but this opens up more bulb options. wire and make sure enough solder has penetrated the wire jacket to "fix" the end of the stranded wire.

I've used them to add motion sensors to LED ceiling lights. It has become very convenient so that everyone who will change the light in the future can understand this, it is a protection against idiots. It is difficult to insert a thin wire into the terminals. However, if you use a thin tool to loosen the connector before inserting the wire, it's pretty easy. one

We replaced recessed lights and found that they were already connected with this type of connector. Rather than redoing both connections, I decided to purchase this pack so I could just hook up our new lightbulbs and connect directly to the prepared main wires. We encountered the problem that our lamps have too thin a wire to activate the locking mechanism. The wires just bent when plugged in. We ended up connecting the lights with 18G electrical wires to make them strong enough to use the…

Most LED light inserts or downlight conversion kits have this type of connector already installed on the power cords. Some inserts may have an Edison adapter (traditional screw base) in the retail box with the mating half of this connector already installed on the short pigtail. If, like us, you're making the constant jump to using LED bulbs (as opposed to screw-in LED bulbs) in your glass lights and don't want to mess around with the extra bulk or hassle of an adapter, this is probably the…