🔑 Premium 2-Wire Ignition Switch Kit for Electric Scooter ATV Moped Go Kart - Includes 2 Keys (1 Pack) Review

Worked great for adding keys to my Razor MX650 kids bikes. * Requires an updated controller from electricscooterparts.com or another seller like Ebay. Make sure the updated controller has a "Power Lock" connection.

All the products I rate above are labeled. The delivery was always as expected, quality as advertised, nothing was returned. I don't have time to write a separate review, so I attach my note to each review. If, like I said, you can't accept it, I don't mind. Thank you Edwards, P&J.

This switch was similar in appearance with one difference. This is about an eighth turn from my original derailleur, which was a quarter turn. The functionality is the same, removing the cover for the connector was a bit of a chore but not too much of a chore, also the wires are not polarized meaning there is no wrong way to mount the connector.

I managed to pair and connect this lock a bit so this lock powers my daughter's Razor Vespa. They didn't anticipate the children that they might have a friend who would try to jump on him and ride behind them. So now is a good preventive measure to set "Key On” and "Switch On”. The wires are hidden fairly well and require a bit of work to get them too, but it was worth it.

Surprisingly smooth and secure closure. I used it on a 1970 Honda CT90 that had lost its key until I could find a genuine Honda one. However, I soldered the wire thicker to match the wiring on the bike and the bullet connectors. I would not recommend heavy duty use. For CT90 owners, the hint is that if you are looking for a motorcycle ignition, it will not fit the 1.4" socket. You need to cut 2 wide circles of plastic or metal discs to fit there. I know it's not listed for the CT90 but I got it