INEFIL ER70S 6 035 Inch 10 Pound Welding Review

I have a professional welding workshop. I buy and test a lot of wires. For general mild steel welding, this wire has performed well in every spool I have purchased. Right now it's about 25 rolls of 11 pounds. It's as good as any other best wires I've bought even if they cost a lot more. But this material is always an advantage.

Like the other reviewer I wondered why it wouldn't weld properly and noticed that it didn't matter what I was doing and not even pulling extra wire the way the coil was made hang like the spool is twisted so that the wire has been wound from left to right and vice versa according to the width of the spool. I couldn't finish my project. Here's an attempt to save $5. Went to the local shop and just got another MIG wire. Pooh.

I installed this 10lb spool of .035 wire 6 weeks ago and it has worked great on about 7 jobs. it was not removed and reinserted. then, in the middle of work, the wire feed began to slow down and then stopped coming off the torch. I opened the lid and found that the side of the spool was broken and had pinched the wire. The plastic that makes up the roller is very thin and brittle, and bits of it are lying on the bottom of the machine. I will ask for a replacement or refund.

Very poorly packaged but the item survived delivery. The product corresponds to the declared, very well welded, little spatter. The way the wire is wound onto the spool is really odd, it almost looks like they should have been allowed to untangle the spool a bit. However, the wire is transported without any problems. Edit to add: With about 80% wire used, the winding still looks a bit odd. However, I have had no wire feeding problems with this spool and the wire quality seems excellent. I would

This is a really high quality welding wire that runs very quietly. I was using the same size cable from a big store with the same settings and my Hobbart Handler 210 overheats and shuts down after a few minutes. When I bend the torch hose sharply (the torch hose goes over my shoulder) I can hear the wire squeak and jump in the torch hose. ****Not with this wire****, it runs very quietly, no noise at all, and I was able to weld for at least 20 minutes (all I need for each part) with no problems.