🌡️ Inkbird C206T Heat Mat Temperature Controller with Day and Night Thermostat, 1500W, 6.56 Feet NTC Sensor, Fahrenheit and Celsius Degree, -58 to 212F Review

seems to work well. Directions are confusing. Set the highest temperature you want in the room. Set the difference to the number of degrees you want to allow cooler. For example, if you want the room temperature to stay between 40 and 43 degrees, set the value to 43 with a difference of 3 degrees.

I use this ceramic bulb to control the temperature in my bearded dragon cage. The initial setup was a little confusing, but I got the hang of it and love the dual temperature timing. This is mostly accurate, I had to correct for temperature drift a few times, but it's probably based on probe placement. As long as I check from time to time this is great for keeping the cage temp consistent.

I've had this for over a year now. I used it to replace a cheap "Thermocube" connector that failed after a month of use. I use it to run the heating in the pumping station in winter so that the well doesn't freeze over. I can set it very low and the temperature gauge is very good for knowing where you are. I have an extra thermometer in the pump room to ensure the readings are accurate. That works great. I would definitely buy again.

Programming too complicated for simple temperature controlled on/off function. Worse still, it has to be reprogrammed every time it is unplugged. Not practical for simple plug and play applications. Perhaps suitable for greenhouses or indoors where it is permanently connected to the mains, but not suitable for applications where the electrical power is not constant. Reprogramming takes too long for repetitive operations.

I have used the Inkbird c206t along with a reptile heating pad to keep my kennel at around 30 degrees Fahrenheit during the winter. The controller is one of the very few that can accurately regulate temperatures below freezing. It also has adjustable temperature and on/off times, meaning you can set the heater on and off times separately, which can extend the life of this by reducing cycles (not necessarily the reptile bulb I chose). The temperature sensor cable is long enough to be installed…

I was making yoghurt using an old slow cooker to ferment the milk and culture jars to fermentation temperature but without manually turning the multi cooker on and off it held up she too hot. Inkbird has managed to keep them at the optimal temperature for fermentation. The instructions are clear enough and the device is easy to set up, at least for tech-savvy people who are familiar with the intricacies of temperature control. The device is capable of maintaining a fermentation temperature…

I was making yogurt using an old slow cooker to ferment the milk and culture jars to temperature but without manually turning the slow cooker on and off it kept them too hot. Inkbird has managed to keep them at the optimal temperature for fermentation. The instructions are clear enough and the device is easy to set up, at least for tech-savvy people who are familiar with the intricacies of temperature control. The device is capable of maintaining a fermentation temperature between 110 and 113…

In my opinion this beats all the other options including LUX WIN and WILLHI temperature sensors if you just want heat control. Don't waste your time and money with one of those yellow EZHeat plugs, they are not accurate and rarely work as advertised. Inkbird is the most versatile temperature switch I've ever come across. It has a power rating of 1500 watts and a very wide temperature range. I am currently using it to keep my RV with a heater above freezing. The only downside is that you'll…

In the winter I use a panel heater in my bedroom. The thermostat on it works fine but I don't see a need to turn it on during the day when I'm not using the room. So I was looking for a good outdoor thermostat that wouldn't cost an arm and a leg. I chose this one and it works great. I set it so that the room is about five degrees cooler during the day and warm at night. Once I got the settings exactly how I like them, it worked flawlessly. And since it has an external temperature sensor, I can…