Its pros: The device is very small! At idle, the voltage is about 70 volts. In a set of wires of 16 sq. Mm (written), how much actually needs to be measured in operation, let's see. For this price a gift! Some cons: There are balls of solder on the board, even a smd transistor was lying around inside, but it didn’t seem to be checked from its board, it probably flew in when assembling from somewhere, it seemed like they were soldering on their knees in a hurry.

Bought as a gift, checked at home by plugging it in, everything works. The owner of the gift will already check for welding! Assembled soundly, complete set, delivery is fast, the box was whole. Well, time will tell how it will work.

I am far from a welder, but I think for 1400 (December 2022) you should not complain. When welding 3rd, you have to set the current to 100-120 (on resant 190 norms for 60) worked for 3 hours, all the rules. For beginner welders and who work with small things and rarely fit) In which case I will add I recommend to buy up to 2k)

Turned on, checked 3mm brews, let's see how long it lasts. The only plastic case in the holder was poorly screwed, the edges on the screw were torn off, who was going to tear off his hands (he screwed it himself)

He works! Despite its diminutive dimensions, it proved to be functional in the evaluations! I paid 1500 rials for it, which is so much money that you couldn't even buy a regular power supply for a computer, but here is a welder! The electrode lights up successfully. On the other hand, I did not observe the protection from sticking. And last, the fan. It seems that in order to keep the transistors from overheating in such a little box, it has to spin quite quickly. However, it creates a…

The real maximum current is 105A. Divide the scale by 2. It cooks well with a triple, four electrodes without stopping, there is no overheating. For this price, I recommend for a home-garden.

Rutile electrodes RSE S-46 2.5mm were purchased for the sample of the device (chosen according to reviews) Third-party welder rating: excellent. Again, the assessment is for the intended use :) The result was recognized as very acceptable and three observers are quite ready to purchase the same devices for themselves. - I myself am very pleased. And why, in the country, cook, cook, do not call a neighbor. There are no plans for any oversize for welding, so the length of the cords (1m) did not…

The device is very compact, I have not seen such yet. Cooks even with a 4mm electrode at maximum current. Unkami cooks, but the arc is interrupted (uncritically), you can cook. Short cables are not a problem. The handle is very comfortable.

Pure in fact. Incredibly small machine! Not likely short wires. But they are there and this is a plus, so if you immediately need to weld something after the purchase, they will fit and serve for some time, and then of course get a longer one and a handle, a new one is a must. This one works well, as it were, a limited number of times. The arc is stable. The electrode used C grade. SSSI will not accept base coat, only rutile coat. Keep in mind. The current regulator works, but you need to…

I'm not a welder yet - I'm just learning. I buy for use in the country. Until the normal electrodes arrived. To check, I found some old 3mm electrode of an unknown brand, which was lying on the loggia for about 30 years. Of course, it is incorrect to talk about some kind of quality of work with it, but nevertheless, it coped with it quite well when installed on a 120A regulator. I just made sure that the device is working and nothing is heated anywhere. When buying, first of all I paid…

This is the simplest and cheapest device. There can be no talk of any 200 amperes. I understand the delight of people who bought it for 1500 and write flattering reviews. With a troika, he cooks not everyone and with difficulty at full power. The first day I tested it, the next day it died. Now in warranty repair. It was given to me by a person who bought it based on reviews and is far from welding. I wouldn’t take it myself and I don’t advise others if, apart from thin-walled profile pipes…

I am very pleased, in my house, at the dacha I have already helped out several times, the pro-welder was surprised by the quality of the weld, power and dimensions.

Some pros: Great for welding for home, cottages and small jobs! Very compact, but smart. 3mm electrode for 60-70 A cooks perfectly! Has cons: The cables are short, at least add 0.5 m each, although for its price, there is nothing more to expect.

He works! In tests, it turned out to be working, despite its small size! I bought it for 1500r. now you can’t even buy a normal power supply for a computer for that kind of money, but here is a welder! The electrode ignites well. But I did not notice the protection against sticking. And the fan. I understand that to cool the transistors in such a small package, it has to spin a lot. but it makes a lot of noise. It's stressful. Also, of course, short cables, but on the other hand, thanks for…

I’m already buying the second one (the first one went in an unknown direction) the price / quality in this tool are ideally combined