Optimized for SEO: Kohler GP77886 K-GP77886 Faucet Valves Review

There are two faucets in my house that use this faucet and both times I misdiagnosed it. The first was my shower and there was no hot water the entire time so I just replaced the faucet but no change. Took it apart and replaced the pressure equalizer behind it and the problem was solved. A small drop appeared from the second tap, again I thought it was a mixer, no, I was wrong again. Replaced the faucet and it was actually dripping more than before, disassembled and replaced the pressure…

Our old faucet top had a slow drip that exited the front where the temperature setting meets the brass post. When I removed the old faucet to clean it, the main O-ring broke after reinstalling it, causing more flooding when I turned on the shower. The main o-ring looked fairly flattened and worn. Suffice it to say that the old faucet cover was already dead. It was originally installed in 1999. I was 16 years old. I was very nervous after spending $40 on a part that I wasn't entirely sure would…

This valve has four dripper positions (eight if you count hot/cold, nine if you count the main seal, but dripping from the faucet, not because the faucet doesn't close like the others)1 • Shut-off seals. This is an enlarged version of the triangular spring and rubber cap. It is in this part. Unfortunately, the spring and rubber cap are not available separately.2 • Seals between shut-off valve and pressure compensator (open for water inlet). These are the O-rings that come with this part.3 •…