Lead-Free 2-Handle Chrome Bathroom Faucet With Lift Rod Drain Stopper And 4-Inch Centerset Basin Mixer Tap - Perfect For Lavatory Sinks Review

My ceramic sink was at least ten or twelve years old. The diameter of the required mounting holes was not noted. I had to enlarge the mounting hole diameter with a die grinder with a diamond bit. At least 3 previous faucets have been installed in the sink with no problems. Some folks might not want to mess with enlarging a sink hole. I didn't put a caliper on it but think the required hole was about 1.125". Possibly newer sinks come with larger holes than the older sinks. I would buy it again.

The faucet is simple to install and very nice, especially for the price, but, oh boy, that drain. To begin with, there are absolutely no instructions regarding the drain installation. I managed to figure it out on my own, but it’s not quite like the ones I’ve done before. The kit comes with a ridiculously big spoil of Teflon tape, like 100 meters of the stuff. There’s a reason for that. The drain leaks everywhere! The plastic threads are loose and flimsy, and I had drips coming out of every…

I love these so much I got the matte black and it's so elegant and beautiful! everything from the packaging to the quality was just perfect. the only thing is that they are slightly smaller in person but still worth it and a really nice product, would buy again for sure!

Arrived morning after ordered. Well packaged and included ample tape and cotton gloves for install. Instructions were a little small and difficult to read and drain plug assembly was not incredibly sturdy. But product looks nice and is functional.

I have black matte finish and bought it at 1/4 of the price of others that are brand names and similar. Looks and works great. Don’t be alarmed by the plastic drain pipe as most brands are going to this. I had a hard time accepting this, but as I realized going through other brand names that this is now common, I was willing to try this brand. Easy to install. I see some people indicating install was hard, but I don’t believe it’s due to the faucet. Our experience was that we installed on 3…

I bought this item on the comments from other owners. They were right. This faucet was easy to install, and has a nice solid construction , and a smooth on off operation. It's price was below other more recognizable names, but I'm glad I bought this brand which I've never heard of, but will buy again in the future for my other bathroom.

Looks nice. Works great. Smooth operation.I knocked off 1 star due to the water that sits around the stopper piece. If your sink has a deep insert, this won't be a problem.For most sinks, the drain hole isn't deep, so the thickness and non-graduated design of the stopper prevents all the water from draining.I had to buy separate drains to get rid of the issue, but so far loving the faucet .

This was a perfect fit for my sink. We had an old faucet that was short and small. This extended out further from the back of the sink and raised it up a little bit. Only thing I was disappointed with is it not having the hoses but It says in the listing they aren't included. So my fault for not reading.

This faucet exceeded my expectations, particularly for $39. It is a nice looking, mechanically robust product with a quality-appearing brushed nickle finish. Easy to install, everything fit properly, and there were no missing pieces. In fact, the faucet itself came in a cloth bag with a drawstring within the box to protect it from any dings to the finish. Oh, and by the way, the box also included Teflon thread tape and a pair of gloves! I was very impressed by that! Moen, Phister and similar…

This would have been an awesome purchase with the exception of one glaring problem, the sink flange where the water drains from the basin sticks up about 1/8" so the sink never drains completely. They cold pressed brushed stainless over a plastic core so the edge is unable to go flush with the surface of the sink like every other flange made by all sink and tub manufacturers. This may not seem like a big deal, but in places where hard water is a problem, the pool of standing water slowly…

It looks nice but a bit of flimsy comparing to Moen faucets. I would rather pay a little bit more money to have Moen faucets with the quality,look and life time warranty.

I live in an apartment and use a portable washing machine that hooks up to the bathroom sink. When I switched apartments, the new place had a faucet which did not allow for adapters. I searched Revain until I found this set. It looks so beautiful, high quality.I had maintenance person install so I can't comment on ease of install. But what I can say is that you get so much! They give you plenty of instructions, extra parts and even white gloves to wear while installing. Classy.The best part. my

Easy to install, quality made and love the look, this is the 3rd one of these faucets I have installed, might do one more in another bathroom, depends on how productive Im feeling lol.

Cheap, easy to install, look ok but have to replace 1 out of 2 due to internal leaks.Water is dripping out of the hole the stopper rod comes out into the cabinet.bought it Fem 2021.Normally theses things should last a coule of decades

Plumber had trouble aligning the base to the faucet. This added to the cost of installation. Also the guts are plastic not brass. Price reflects quality.

It was easy to install-the plumber did it-course it was covered in pvc/cpvc glue-that’s what plumbers do. They did manage to get the hot and cold sides right so I guess I’ll clean the glue off of everything and just be happy it doesn’t leak. I’m way way happier with Moen than with my contractor.

Only one week in. My only complaint so far is one of the back drain pull-up rods doesn't go up as high or as smooth as the other two. I bought three of these faucets.

This is a solid product, and I recommend it overall for the money, but the do-it-yourselfer should know that there are some issues:First and most importantly, it has a bizarrely long outflow pipe (much longer than the standard size). Now, it is better to have too long than too short, but it adds two things- first, be sure you have a hacksaw or the equivalent as a required tool, but second, be sure you measure and cut the excess pipe BEFORE you install it to save yourself a lot of hassle. I had…

You will need some siliconized plumbers caulk for connecting the drain to the sink. The rest is all there. Faucet valves and controls work very well. I had to remove the trap to remove the old drain fittings, but it went right back in with the new fittings. Figure about an hour of work or so. Don't rush it.

The package was put in a nice box with a bag to protect the faucet. All parts and pieces were in the box. I installed it very easily, though I didn't use the drain pipe for mine is metal, not plastic. I love the look of brushed metal, and it's a nice affordable upgrade. I did buy the braided Faucet Connector 16" Long, 1/2" IPS Brass Nut X 3/8 Female Fitting, Stainless Steel Lead-Free, 2 Count.