🔌 Legrand-Pass & Seymour SA993BKCC10 Black Connector: 15-Amp, 125-Volt Straight Blade, Two Pole Three Wire Review

I haven't written many reviews lately but thought it would be a good idea to warn others about this poorly designed plug. As others have said, this design makes the fork difficult to install. I've installed plugs wired this way many times in the past, but this plug has a much more serious problem. That means there is no stress relief. Well-designed connectors allow the connector to be pulled into the cable insulation (where the outer insulation of the cables is not stripped). So when using…

These connectors are well made but for around the same price I prefer Leviton products for their cable routing. All of them are easy to connect, especially after bending each wire into a small hook and tinning them first. Mechanism: Pass & Seymour or Cooper Products: The body containing the blades/bushings is inserted into the front of the outer shell. A very short screw secures the case to the case to keep the case from falling out. Because of this design, the cable needs to be routed freely…

I bought this connector to make an extension out of an old 16/3 cable. This is a good connector but will require some patience to cut the outer insulation, inner insulation and bare wire to length. Advantages: - Inexpensive. About $3 off the Revain Warehouse deal. If the core insulation is properly gripped in the strain relief channel, the strain relief channel will be at an angle such that considerable force is required to pry it out. The connectors are color coded: gold = hot; silver =…