🔌 Lian Li STRIMER+ Triple 8-PIN GPU RTX 30 Series Extension Cable (Optimized for GPU RTX 30 Series Compatibility) Review

Makes your case much nicer but plan your cable routing, you can buy a special shorter cable for the PSU, if you have a small case it will take up space; RGB also has additional cables that need to be routed to the hub

Once you've plugged in the cable that connects the pole to the remote, it's VERY difficult to unplug. Be careful as you could accidentally pull the wires out of the Molex. Keep that in mind if you're just connecting something for testing purposes.

Please do not buy items above retail price. These speculators buy goods in bulk, causing shortages. Because of the scarcity, they cost it 2-3 times more than the RRP. We consumers only encourage this behavior by buying their products at their price.

Does not work when installed with fan control. The streamer controller needs to be installed directly on the motherboard to avoid flickering. That means if you have SL fans, you can't use the streamers with the LianLi software.

Arrived quite quickly and undamaged. They are thicker than I thought and a bit difficult to work with. I attached them but they are incredibly difficult to bend. Overall I'm happy because they sync with the Corsair icue fairly easily.

I bought both trimmer extensions. So far I'm happy with the overall installation process and ease of setup. In my case the GPU installed is not the last one I get so I had to disassemble the extension to convert 3 8pin to 2 8pin which is really easy. I recommend it to everyone, but only on sale because I got mine, otherwise it's too expensive.

Won't create a rainbow wave from one end of the cable to the other, which is the only effect I particularly want to use that I could get with the dual 8-pin version. There is no support from Lian Li either. Would there be a star. Also, there is a lot of price gouging on this (and all electronics) these days. Don't buy it from a seller who is asking a lot more than $60 for it as it is the MSRP. When you pay 200-300% of the RRP, even if it costs you that much, you are perpetuating the BIG problem

Got power from my 3080 and did something with ugly 3x8 pin connectors. This thing is HUGE. It's almost impossible to get through any wire hole. So I removed all the connectors that were holding the wires in nice straight lines, completely disconnected the RGB strip from the home power cables, and then connected the bundle of cables together. With the RGB part now separate I have completely hidden all 3 GPU connectors and tucked them under my 24 pin header and then tucked them back underneath…