Liqui Moly 2001 Valve Clean Review

I take it on the road. I'm used to refueling at my own gas stations, but they are only in Rostov, basically, and it happens when you go far you have to refuel at an unknown one, then I pour this additive into the tank. Then everything is ok with the engine.

Thanks for the great product. Solved the problem of increased gas mileage and an objective decrease in power. The car seemed to have received a second wind, driving is a pleasure. I will continue to use it as a preventive measure. Thanks again!

An excellent additive from a trusted manufacturer. After use, fuel consumption decreased slightly and the car went a little more cheerful.

I poured 1.6 cfna into the Polik by 35 liters, a noticeable difference in the behavior of the engine became noticeable after 30-40 kilometers of haulage, maybe self-hypnosis ? ! But really something different, not as usual)

I recommend Pros: An excellent soft cleaner for injectors and injection systems from a well-known German manufacturer. Got cons: It becomes expensive, but changing injectors, as it turned out, is even more expensive

After application, the engine speeds leveled off. Possibly the cost has gone down. The price, of course, is horse for 300 ml, but with market discounts it turned out great.

I ordered 7 cylinders from the official seller. A hefty box arrived with a branded sticker. In this same box, each cylinder was additionally wrapped in its own soft packaging, which excludes not only penetration, but also, perhaps, a jam. Guys, you are amazing! Thank you for your meticulousness.

In December 2022, the check engine light came on on the dashboard. Gasoline car. Mileage is about 100,000. I have never poured anything into the fuel. Refueling only LUKOIL. Onboard gave error 172 - mixture too rich. The error was not removed onboard (although this was very rare during regassing, but it was filmed). After pouring LIQUI MOLY Injection Clean Light after about 40 km, the check went out by itself, the onboard one reset to zero. I don’t know what was washed in the injector, but the…

Some pros: Everything is easy, simple and understandable, it seems to fulfill its declared properties. Has some cons: The design feature does not allow pouring out the remaining 10-20 ml, well, that's okay, it's not scary.

I never believed in this chemistry, but on the mini clubman, an error began to appear when starting up "the mixture is too rich" Filled with 20 liters of gasoline - the error went away after 100 km And perhaps a placebo, but the consumption in the city fell from 8.9 to 8.2 (most likely due to the fact that it has become warmer, but I want to believe that because of this jar))))

While I haven't done any scientific testing, fuel economy appears to be significantly better (about 2mpg); my car seems more responsive (more like it was when I first got it); and the sound of the engine is different. These differences are not due to the Jectron, which I use from time to time but didn't put in this tank. I will get more in the future. UPDATE: Upgrade to 5 stars. Now that the entire can has been passed, my mileage is higher than it has been in a few years (about 4mpg better)…

Products from Liqui Moly work! I have a 2014 Ford Expedition that would shut down in the morning until the engine was warm. I had a friend run a test on his computer and it showed a misfire on cylinder #8. I replaced the spark plug, coil pack and injector on cylinder #8. The misfire did not go away. I used two cans of Liqui Moly valve cleaner along with a Liqui Moly fuel system cleaner at the same time with a full tank of gas. I did not start the car for 8 hours after adding the valve and fuel…

so this works pretty well through the gas tank for cars with injectors that inject into the valves and not straight into the combustion chamber. If your car has direct injection (the latest) there is a YouTube video on how to gently spray a valve cleaner directly into the throttle body and get great results with before and after photos of the intake valves. Direct injection cars are notorious for dirt build-up, so keep an eye out. On all gas powered vehicles, clean the valve in the gas tank and

I filled this product below half the tank mark. falls below 1/4 mark then fill with fresh 89 octane gas I drive a 2005 Mazda 3 2.3L with over 182,000 miles and the aging was noticeable and it was time to do something about it. According to other products I've used to get rid of the problem, nothing worked, not even Seafoam, it didn't do anything but smoke. After I installed it and filled it with fresh petrol. I took it on a 50 mile freeway trip at the speed limit, 60 mph and 70 mph in certain…

I use this every 5000 miles or so on each of my cars: 2004 BMW E46 M3. 2006 Audi B7 A4 Avant 2.0T FSI and 2014 Nissan 370Z Touring Coupe. The Audi 2.0T FSI engine had insane idle problems, even after a full timing belt overhaul. There was also a noticeable loss of power in the medium speed range. The first round of this stuff, after filling a nearly empty gas tank with this additive, went quite hard through the first half of the tank. You can smell carbon deposits in the intake chambers burning