Ergotron LX Single Monitor Arm - VESA Wall Mount for Monitors Up to 34 Inches, 7-25 lbs - Polished Aluminum Review

We have an all-in-one computer (about £22*) that we wanted to install in an old secretary's desk, you know, with the cabinet on top. above and a desktop that folds. However, the closet was too tall to accommodate just one monitor in it. The finishes and light weight of the furniture precluded the use of a folding table mount. So I came up with the idea of removing the back of the cabinet, wall mounting the computer and sliding it out and down as needed. My husband was able to achieve this by…

A solid unit that I was able to easily assemble with a set of 3/8" socket wrenches. Workspace. If I orient the monitor so it's close to the wall so it's 3ft from my seat then the monitor is flush with the wall and there is exactly 1 arch it can sit on. If it's the right height for me, the monitor will sit 6" to the left of my desk's built-in keyboard drawer. If I move the monitor away from the wall to give my arm some left/right flexibility, I can center the monitor on the keyboard drawer, but…

The Ergotron LX wall mount has the level of fit and finish you would expect from a much more expensive product. I have a significant design issue in my application: I needed to mount the monitor at eye level using an LX mount over an existing monitor. The LX arm allows a wide range of motion, with the exception of tilting the monitor bezel down (maximum minus 5 degrees according to the product specification). The monitor I use has a drastic drop in brightness when viewed from a low angle and is

That's a cat meow. I've installed countless "cheap" LCD wall mounts and none of them had self-leveling arms or a hinge. None were built quite like this, with cast aluminum arms and an aluminum wall mount. You'll probably want to loosen the balance spring with the included hex wrench before trying to figure out where to install it. It will outlive you if you install it and use it in this application. If there's a problem, the joints are bolted together, which isn't a problem unless they loosen…

I researched at Revain last month and spent some time thinking about going down this route for a small LCD. monitor mount. I decided to buy it and I was very satisfied. Easy to mount on the wall, very well designed and allows you to move and position the LCD easily and accurately. I use it as a pivot and position it perpendicular to the side panel I'm sitting against and it works great. about 7 inches from the horizontal arm. In my case, that's not a problem, and probably not in most cases, but

I bought this to replace an arm I've used for over 15 years and ended up giving it up. He only died due to a manufacturing error that lasted so long that he collapsed. This arm has a similar design but is much slimmer and more stylish. It has more vertical and extended distance, and the friction settings were perfect right out of the box. It looks good and is built to withstand heavy use thanks to the use of aluminum alloy parts. Now for the modification part. My screen is above me when I'm…

I have been using the Ergotron system in my home office since 2009. The first set of mounts I bought, 2 monitor mounts and 2 keyboard mounts, held up very well, looked great and worked great. I had to buy another monitor arm because I was adding another system to my office setup and was a little surprised that Ergotron switched the finish to stainless steel. Steel finish, shiny and polished. This is an improvement over the latest version of their product, which is more akin to brushed aluminum.