Header banner
Revain logoHome Page
enhanced security barbell lock 1479dat with long 0.62" shackle by master lock logo

Enhanced Security Barbell Lock 1479DAT with Long 0.62" Shackle by Master Lock Review

7

·

Very good

Revainrating 4.5 out of 5  
Rating 
4.3
🛑 Brake System, 🏎️ Performance Car Parts & Accessories

View on AmazonView on ЯM

Media

(4)
img 1 attached to Enhanced Security Barbell Lock 1479DAT with Long 0.62" Shackle by Master Lock
img 2 attached to Enhanced Security Barbell Lock 1479DAT with Long 0.62" Shackle by Master Lock
img 3 attached to Enhanced Security Barbell Lock 1479DAT with Long 0.62" Shackle by Master Lock
img 4 attached to Enhanced Security Barbell Lock 1479DAT with Long 0.62" Shackle by Master Lock

Description of Enhanced Security Barbell Lock 1479DAT with Long 0.62" Shackle by Master Lock

Fits 5/8in (16mm) receivers. Usable length of receiver pin is 2-3/4in (70mm). Push to Lock locking mechanism - push lock body onto pin firmly and remove key. Weather Tough seal and water tight cap protects lock from moisture and dirt. Class III/IV 10 000 lb Load Rating. 4-pin cylinder for added pick resistance. K1 Key Blank. Chrome plated. Made from solid brass. Improves wear as well as provide corrosion resistance. Fits standard coupler latches. Consists of 4-pin tumbler mechanism.

Reviews

Global ratings 7
  • 5
    4
  • 4
    1
  • 3
    2
  • 2
    0
  • 1
    0

Type of review

Revainrating 5 out of 5

Parking Brake Components

Sturdy, well made. #1 doesn't like using a key to lock because the lock end won't snap to the post unless you turn the key a bit.

Pros
  • Chrome Plated
Cons
  • Some Cons

Revainrating 5 out of 5

real keys! - Spare Parts

I like these because they have real keys and not the usual round keys from a paper towel dispenser. The only possible problem is that you have to unlock them a bit to fully activate the lock. Or maybe it's just a pair I have. Second, they are extremely trivial, nothing bothers me, I'm still completely happy with them.

Pros
  • Key Blank K1
Cons
  • Almost OK

Revainrating 4 out of 5

Nice lock, works for Tesla

Nice lock. A keyhole perpendicular to the pin allows access to the keyhole from the rear while maintaining enough length to work with the Tesla (the hitch is mostly closed on the Tesla and there is only about 2 inches of room on the left side due to the trailer's electrical plug) . Very happy with this lock.

Pros
  • Class III/IV 10,000 lbs load capacity
Cons
  • old

Revainrating 3 out of 5

Requires some silicone but good value

When I first got them they felt a little tight. I sprayed silicon grease in the jars and they immediately unscrewed. They fit my hitch and hitch accessories well and I expect they will last a long time as long as I spray in some lube every now and then. If not, I'll get back to you.

Pros
  • Cylinder with 4 pins for increased tamper resistance
Cons
  • No machine

Revainrating 5 out of 5

Anti-theft safe, not anti-theft.

Sure anti-theft device, probably not anti-theft device, easy to beat if you want. It has a shorter pin so measure your hitch/receiver to make sure it's long enough. When in doubt, go for the longer stainless steel version, use the exact same lock, just a longer stainless steel pin. You will also need some clearance to install the lock.

Pros
  • Fits standard connector latches
Cons
  • Minus present

Revainrating 5 out of 5

I was looking for a locking pin that would fit my car. That Rocks thing

After years of searching for a locking pin that won't last 100 uses I finally found it. It fits the 2019 Ram 1500 and 2017 Mercedes GLS like a glove. I don't usually rate my purchases, but this one deserves a rate. 1 person said it doesn't close without a key. mine are keyless It is very nice.

Pros
  • Made from solid brass
Cons
  • I really don't like it, it's ok

Revainrating 3 out of 5

Check the user's picture.

Be sure to look at the second lock pictured above as this is the lock you will receive. The lock on the 5/8" Receiver 1479DAT has been redesigned from the first picture, the old design had the keyhole in line with the pin, however this can make it difficult to remove the lock in tight spaces under the bumper of a truck, there are a few vehicles at who just don't have enough room for the new 90 degree off-axis design Make sure there is enough room on one side of the receiver to accommodate the…

Pros
  • Fits 5/8" (16mm) Receiver
Cons
  • I vaguely remember