MATNIKS Heavy Duty Neoprene Rubber Sheet - High Grade 60A, Ideal For DIY Plumbing, Gaskets, Flooring, And More Review

I needed a dense piece of thin rubber mat to use under a custom truck battery install. I bought a custom made steel battery box and an Odyessy battery. Once the box was installed and the battery was locked into place I noticed the battery slid side to side about a 1/4 inch. I used the rubber mat and cut it to fit the bottom of the battery tray, dropped in the battery and locked it into place. Because the mat thickness was only 1/16 it didn't inhibit the locking bracket over the battery. Now…

This item laid out flat right from the start. It was easy to cut and work with. I would recommend this product. That's my review.

Used to make a steering column seal and a couple of gaskets. Good quality material. When you take it out of the plastic, it'll collect dust pretty quickly due to static electricity, but that's no big deal. Store the leftover material in a gallon freezer bag for other projects.

I bought this to act as a gasket for a kitchen faucet. I should have paid attention to the 1/8-inch thickness. It's a little thicker than I needed but I can't complain about getting more than I expected. This is an excellent product.

I used this as a leaf spring shim on my truck. I'm sure I'll find a bunch of users for the leftover material but it works great.

Good purchase. I used this to wedge in between the stock and barrel on my Savage Bmag 17WSM Bolt Action Rifle because the stock was wiggling. Good for sealing and quick fixes like that

Used this product for a cup holder gasket for my wife’s car. The gasket from the parts store was 30 bucks, made my own for 10 bucks

The product is exactly what I needed, and it is mad of good material yet quite suppleHowever the price is quite high. Expensive compared to other rubber sheets available in the market.

Good piece of rubber, worked well for what I needed it for. (Book binding.)Had little imperfection, was strong, held up well with tugging and glue. It cut easily with an exacto knife

Used these to hang steel gongs for plinking. Worked flawlessly. Highly recommend them, and would definitely purchase again.

This item was exactly what I needed for a marine trailer license plate holder. Cut my template with a jig saw slapped on the plate with some stainless bolts, and good to go. A little pricey, but saved some $$ on this DIY project.

Made a unique gasket for my storm door. Easy to work with using a utility knife/box cutter, and you can pre-draw on it with even a black sharpie.

Smell isn't as strong as some reviews had me imagining. It isn't a bad smell, it's very similar to new tires.One issue, which mattered for my application, is that the sheet is nowhere near square. So if you need to use the full sheet, or were counting on using most of its area for cutting out smaller, squared pieces, you'll need to take that into consideration. And it's more than slightly off, it's immidiately noticeable with the naked eye. Again, if you need a full square sheet, it'll be…

When I first received my 12 by 12 by 1 sixteenth piece of rubber, I thought that it was just rubber. I was very wrong. I have found many uses for it, from standing on it to land standing on it. There are so many benefits to this wonderful invention, almost too many to list. When I get home from a long day at work, I love to stand on it and just squish the rubber with my toes, lightly caressing it with my skin. I cannot fathom how I lived without it. I am not the only person in this family that…

These were perfect for what I wanted to use it for. We had taken a ceramics class and made some bowls so I want I wanted to put something on the bottom so they would not scratch the ceramic floor if we used them for dog bowls etc. Was able to cut them and glue them to the bottom of the ceramic bowls.

I needed this product to reduce noise coming from my truck's leaf springs. I cut 3x3 squares using a utility knife and inserted them between leaf springs. No more noise.

I used it to make a spacer/pad for a car window on an antique I'm restoring. I mounted it between the glass and the bracket that that holds the glass to the regulator. It worked well.

I used this to make a waterproof gasket for an in ground light. Good material and just the right thickness. Would buy again.

Had to make a flexible and rainproof "cover" for an electrical receptacle that couldn't be fitted with a plastic cover, and the rubber sheet, with some grommets added and a small bungee cord, worked perfectly.

Product will work great to make hard to find gaskets during my vehicle restoration project. Using it behind emblems and turn signal lights on a 1972 FJ40.