🚗 MAXXHAUL 50397 Trailer Hitch Riser | 2 Inch Receivers | 4 Inch Rise/Drop | Enhanced SEO Review

Using the scooter mount on my car pulls without a riser. The riser provides the perfect lift height to prevent the carrier from dragging.

This product was just what I needed to extend my winch and get it off the ground. The standard mount, which mounts like a snow blower, is too far back and too low for a winch. I've already put it to the test pulling a 2000lb sedan out of a ditch so I'd say it's strong enough.

This product allows the receiver to be raised about 4 inches for my luggage rack. It also extends about 6 inches further from the car. This worked fine for my purposes. It does not include the pins needed to hold it to the receiver. So if you don't have a towbar or anything else to steal, you'll have to buy that separately. I gave 4 stars because it looks like it should have been included.

I like this product but it fits quite loosely in a 2 inch outlet. Probably about 1/8 inch less. Because of this, it's quite noisy and wobbly. watch the video If I have a luggage rack attached and there is nothing in it, it wobbles a lot. This is on a 2020 Subaru Forester with a dealer installed towbar. I could attach a thin strip of metal to hold it in place or insert a piece of wood whenever I use it.

This clutch riser is very strong and very strong. Super heavy, at least 20 pounds, the bottom is not hollow but solid steel. Unfortunately it didn't work for my purposes. I have an Acura Rdx with an aftermarket hitch that's quite a way under the bumper and I was looking for something that could lift and lift out of the bumper so I could mount a luggage rack and it just wasn't enough to free the bumper.

The design is good, but the production uses imported steel, the size of which is not comparable to American. The pipe steel is small and generates strong vibration. Makes the hitch useless unless you buy a hitch with a rattle free U-bolt to hold the assembly in place. I still had to add shims to the sides of the tube to stop the side to side swinging. I made this work, but I will carefully consider the country of origin when purchasing a feather duster. Most likely, this brand will not be.

Excellent general characteristics. Very good quality for the price. I used it to get a step out of the way of the reversing sensors (see pic). The holes are plugged inside as is the end (see pictures) - this was unexpected and should resist corrosion. Good. It is quite obviously not intended for towing - see the picture of the label stating it should not be used for towing. I suspect there is no clutch pin because there are so many different types of pins. I bought a Lowes 5/8" bolt with washer