🔧 Enhanced Aluminum Valve Covers, Green - Compatible with Nissan Altima Maxima Murano Quest Infiniti i35 VQ35DE 3.5L (2002-2009) Review

It arrived damaged, the box was damaged and both valve covers. I will still install them to see if the damage affects the function of the lids. If it doesn't expire then I'm fine, but if it does I'll return it.

Matches my Infiniti I35 VQ35DE perfectly. Different from the original plastic cap, the metal caps look very cool. PCV causing an air leak, confirmed by a cigar smoke test). Speaking of oil loss. After 2 weeks of installation I opened the manifold again, checked the valve cover and all 6 ignition coils and spark plugs and there are no oil spots to be seen.

There is an awful lot of screws on the underside of these valve covers that hold the plastic pieces that hold the spark plug tube gaskets in place. Many of these screws don't actually touch the plastic, as if they weren't tightened enough. I tried tightening the screws, some worked, some didn't. I find it very hard to believe that all those screws stay attached. I hope that when they fall out they will at least reach the oil pan and not damage the engine.

2004 fx35 vq35de AWD . I assumed the same engine as the cars listed here, why not a perfect match? Am I wrong? A few issues: The harness mounts were too high, I didn't realize it until they pushed out and broke my bottom camera. The filler cap doesn't come out because it's placed under the chamber, you can't use a standard chamber unless you make one. and cap/tube for oil filling. PROS: ALL gaskets appear to be replaceable, including spark plug gaskets (good in the long run, no new caps, just…

2003 Nissan Maxima SE 3.5L First of all it was damaged in transit so there were abrasions on the back of the valve cover. Now to the product: Pros: Aluminum so fairly durable. Removable baffles so you can replace the pipe seals later. Fits great, no modifications necessary. Looks good on car (adds a bit of shine to the bay) Cons: Finishing had some imperfections. Cap in stock) The PVC valve was defective and did not fit the original pipe (it was an incomplete seal). Most of the screws were not…