📺 PSXLF03: Full Motion TV Wall Mount for 37-75 inch Flat/Curved TVs – Swivel, Tilt, and Extend- 600x400mm VESA, Holds 110lbs Review

Well designed and functional mount but when expanded with 65" LGTV 53lbs, Sonos ARC, 14lbs. 61% of the rated load of 110 lbs, the bracket will sag a few mm. Visually striking! Earthquakes, this mount will fall off and destroy $3,000 worth of equipment. For your investment, consider a more expensive mount with the same function as INSURANCE. It originally had the same LGTV 55 inch and this mount handled it better. If your TV weighs 50 pounds or less then this is a good mount, otherwise look for…

We installed this for a 75 inch TV in the corner. Due to our wall configuration we had to rotate the mount 180 degrees from what is shown in the photos. This works well, but you'll need to remember to unscrew and flip the beveled head of the main mount as well, as it has a defined top unlike the rest of the mount. We were able to fit all four wall mount screws into the 16" studs in the center. However, the screws are at the extreme ends of the mounting bracket and right next to the pivot arm of

I have a 75 inch flat screen that I used for my garden/pool (it's crazy how cheap these big TVs have gotten). Move after nearly a decade of service. This was an adjustable wall mount with two arms, and I've always had trouble getting the two arms to behave together, especially when trying to fold the mount "flat" against the wall. suggested that this was exactly what was needed to hang a larger TV. the position I wanted for the height, I used the hardware provided to mount it to a brick wall as

Full 90 degree extension on my 65 inch TV! Despite some questions and reviews I wanted to try this out based on the price compared to some other TV wall mounts to see if I could slide my TV out far enough to view it as close as possible. 90 degree angle as much as possible. Well it can be done. Installation was fairly easy, but there is a trick that allows the TV to slide along the rail to decenter it before tightening to hold the TV in place. This allows you to increase the required distance…

I have a 75 inch flat screen that I used for my garden/pool (crazy how cheap these big TVs have gotten). My old wall mount was rusty and difficult to move after nearly a decade of use. It was an adjustable 2 arm wall mount and I always had trouble getting the two arms together, especially when trying to "fold" the mount "flat" against the wall. Wall. I assumed this would do just that was what was needed to hang a large TV, however this single arm design looked promising and was designed for a…

READ BEFORE BUYING! You will not regret it! I love the price and functionality of this TV mount! Installing and securing the bracket prior to installing a large, very expensive curved UHD TV is another story. First the disadvantages: The instructions make it very clear that when mounting on a finished inner wall, this must be mounted in the proven middle of two spaced uprights. exactly 16 inches apart, with three screws at the top and two at the bottom. Well, there is no problem! Unless the…