🔌 Motorcraft Hego Sensor (P) (DY1185) in Black Review

This OEM Motorcraft oxygen sensor caused my check engine light to come on. I bought this sensor for half what the Ford dealer was asking. I love these offerings from Revain.

Purchased to fix a P0135 code on my 2013 F150. The code told me it was bank 1, sensor 1 error. I hope your sensor is in great shape, mine was in a terrible place. I replaced the sensor with this one (which Ford charged me $115 for) and the code didn't come back. I had to unplug the battery cables after installation to reset the code.

Great OEM product at a great price. Luckily, I was able to solve the daunting task of removing the old one with my limited tool kit. If you're doing an inlet O2 sensor on a Ford Focus, start with the penetrating liquid overnight. pull off the heat shield. Cut the wires from the old block. The 22mm (7/8 inch) end of the box could not be pulled out with the left hand due to a bad angle. You have to work your way through all the pipes with your right hand and press the wrench instead.

My check engine light came on so I hooked up a code reader. A reader told me it was my O2 sensor. I replaced it with an O2 socket adapter. If you try to use anything else you will have a hard time playing with the space you have to play with. This is quick and easy work. 1 hour maximum to access it, swap it out and then put everything back in place. YOU CAN DO THIS YOURSELF! Save some money by doing it yourself instead of going to a mechanic. You will probably pay 3 or 4 times more for the work