Some pros: Easy to use, holds up to heavy monitors, can be positioned to your heart's content and everything will work and hold up Has cons: More than two wires unfortunately can not be removed inside, but not critical

Has some pros: Convenient thing, frees up space on the table, convenient cable channel Cons: Two 27-inch monitors are difficult to set up. You have to tighten it very hard, otherwise it will sag.

Great bracket for the price. I took it to install a laptop and an external monitor to it. The platform for the laptop had to be purchased separately. The photo shows the lowest position to which you can lower the laptop on the platform. The paw does not fall below. I don’t know why here in the comments they swear at cable channels. I didn't have any problems. I put hdmi from the monitor to the laptop, power and usb. No problem. It is tightened with two hex keys. Very simple. This bracket is…

My first bracket. Installation on the table is elementary, it stands very well, does not stagger, does not play, does not creak anything. Plastic plugs for wires were not useful, and they are not very convenient for cable management. The gas lift is tight, the monitors do not move anywhere, they stand confidently in a given position. Pros below: good design Good gas lift, does not move out, the monitors hold confidently, does not move up or down. Excellent moving parts Easy assembly Very stable

Got pros: comfortable, well fastened, holds everything firmly and without problems. I have no backlashes and no deviations. (almost) Got cons: The only thing that strained is that all the bolts for adjusting the monitors are too tight.

Pros: convenient fastenings even if there is a table wall and only a hole for wires everything is comfortable Different cons: look at the weight of the monitors before buying, will not withstand a lot of weight

I bought it for 2 FHD monitors, I was very afraid that the leg would slide when I tried to turn the monitor, but this did not happen, during installation I found that the main monitor does not have a Vesa mount, I wanted to buy an adapter that compresses the monitor like a Teska from 4 sides, but I found that for a frameless monitor, this will do more harm than good (lights will appear, well, or make the monitor curved) as a result, I found a person on ebay who makes monitor mounts like mine…

Excellent product, corresponds to the description, all screws / washers are included for any type of fastening Its pros: A good quality bracket in terms of metal and plastic overlays for cable management. Confidently holds even heavy monitors (I have 2 monitors of 27 inches each, weighing approximately 6 kg) on ​​fully extended legs. Got cons: As many people write here, the cable channels are too small, 2 cables can barely fit. On the other hand, you don't need more from monitors (power and…

Made a return on the day of receipt. The monitor mount must rotate 360 ​​degrees. On the right stance, it works with great effort, with both hands straight. For comparison, if the steering wheel and brakes worked in the same way on a car, then a suddenly appeared pedestrian could be taken without stopping to the balnica, if it is somewhere in a straight line. On the left, everything works with one hand.

Some pros: Good mount, for 27-inch monitors it fits well, the price matches the quality Cons below: When opening, I didn’t look and took off the clamps, I almost flew into the eye (it was written about this on the clamps themselves. I myself am to blame for this)

if you want to install monitors side by side in the same plane, you will have to move the table away from the wall or take an older model with an additional knee. I set the monitors at about 120 degrees to move the table close to the wall. I saw that in the comments they complain about the cable channel, but I didn’t see any inconvenience, it copes with its task Has some pros: stylish, reliable, easy installation (both on the edge of the table and in the hole) With its cons: the bottom turn is…

For the first time I took a double bracket, I was very pleased. I was finally able to disassemble the desktop. Speaking of the mount itself - definitely worth the money. Sturdy and durable design allows you to rotate the monitors 360 degrees and place them the way you want. Different pros: The large scope of the mounts allows you to set the monitors as it is convenient for you, without limiting anything. Convenient removable wire channel. The bracket itself takes up little space. Due to the…

In general, an excellent bracket for the money, makes using the monitor much more convenient. It remains only to buy a second monitor :D Has pros: Freed up space under the monitor, moderately tightly tightened out of the box (under a 6kg 2K monitor, everything is regulated with effort, but quite comfortably) Cons: Not a very convenient VESA mount installation system (the monitor is installed on 2 underscrewed screws and then tightened with the rest). The 27-inch monitor had some fiddling…

Its pros: Robust design, holds two 27" monitors well, saves space and hides wires Some cons: The racks at the bottom move a little tight, but in general they are not critical because they are configured once (in my scenario, I don’t often twist monitors)

Its pros: The construction is solid, strong and durable. Nothing wobbles. Got cons: May not fit all monitors. I have LG ultragear and I had to screw one stand with force, while bending one die. Although the hands seem to be from that place)

Different pros: Excellent, secure fit. You can clearly adjust two monitors (I have 2 by 27 inches). And most importantly, there is a lot of space on the table. Got cons: Due to the legs that are screwed to the table, it is impossible to move the table tightly against the wall. But this is more of a nitpick. And there are no cons!

I took it for a 32 "monitor. It holds perfectly, although + - I had to turn all possible adjustments back and forth for an hour (especially the gas lift, since the monitor is heavy). I am glad that the declared characteristics correspond to reality. The gas lift holds the monitor well, although it is close to the calculated weight limit (7.5 kg with a calculated 8 kg MAX).

With its pros: Great, comfortable bracket. The gas lift works well and adjusts to the weight of the monitor. When mounted on a clamp, the table can be moved close to the wall - about 10 mm, just enough for cables. Different cons: The only (relative) drawback is that the VESA mount on one of my monitors turned out to be recessed into the case and with rounded corners. The bracket panel did not enter there with the upper sharp corners literally by a millimeter. I had to bite off the sharp corners

All in all, a great device for mounting two monitors. Nothing sags, nothing wobbles. Very thick metal, cutting to the table is hung from scratches and damage. I am satisfied with the purchase.

Has pros: Good, but for some, the length of the legs themselves may not be enough. Has cons: The included mounting bolts may also be short if you are mounting your monitors using a non-standard VESA mount. There is no quick-release monitor mount.