🚨 Nilight 12 Inch Roof Top Strobe Lights: 48LED Hazard Light Outfit for Cars, Trucks, Tractors, Snow Plows, and Construction Vehicles – Magnetic Mount, 12V/24V, 2-Year Warranty Review

Very bright, very white light. The only thing stopping me from giving 5 stars is the radio interference they cause and now they've been installed for a month and one light has flashed a couple of times and it's not working now. I had high hopes as it looked like decent quality. I even carefully examined the water seal and it looked satisfactory, implying a poor quality circuit. I expected at least a year from them for the price. I have sent an email to the seller and have not received a reply.

This is my second purchase of these lights. The first time I bought 4 to mount on the front bumper of my truck (1 in the drivers corner at 11 o'clock, 2 in the middle at 12 o'clock and 1 in the passenger corner at 1 o'clock). They worked great but after about 2 months moisture started to build up in one of them and eventually it stopped working. I bought this set of 2 to replace a broken one and have a spare. You need silicone around the lenses. If I have more problems I will buy a more…

These lights are small and relatively bright for their size. The brackets are cheap and very poorly constructed (very difficult to adjust the up/down angle of the lights) and have no mounting screws/fasteners. The electrical wires of the "pigtail" are very short and therefore connecting them is a real "pain". I bought some short (20") LED strips which light up the road much better. ---- UPDATE --- After two years one of the lamps failed (burned out) and then after three months. later one fell…

I bought these as extra backup lights for my 2010 Ford F150. They are bright enough that I can see my trailer tongue at night and clip through the rear camera. Installation was pretty easy. They screwed to the underside of my bumper just behind the hitch. Installation took about an hour and a half. I had to run a battery power cable through the engine bay and under the truck to the rear brake light. There I hooked up a relay to the reverse lights so the LEDs would light up when I reversed the…

I originally wanted to buy a set of hard industrial lights but didn't want to spend like $200 on lights and a bracket. I've seen them and spent probably an hour reading reviews and have come to the conclusion that all I have to do is put silicone around every possible opening for water to get in to make sure they last. The first thing I did was take it apart (the side screws are a size 4 hex wrench) and just go to town with the silicone. Before I started drilling holes and running wires through

The brackets were not the same as pictured so I couldn't fit them to the hard tail light bracket which was then useless to me. The advantages of these lights are that they are super light and SUPER BRIGHT! I put them on the bench to see if they work and don't disappoint. (13.5 volts) On the con side, the mounting system sucks and the case and cooling fins are plastic. (That's what the description says. You can run them at up to 29 or 30 volts, which I think will melt your eyeballs and will most

Bought these to replace a 55w H3 Halogen/Xenon Fog Light Kit. These lights are much brighter than the H3 and the distance they emit light is better too. The mounting brackets are also more durable; and eliminates (almost) all the vibrations I had with my old headlights. The lamp body is made of metal, the end caps are made of (really hard) plastic, the lenses are made of clear plastic. The end caps are attached with 3 (approx) 1" hex head screws that are securely fastened to the case. The lens…

I ordered this item from Revain a few months ago. The product looked very valuable and I was satisfied with the product. I needed another set so I bought the exact same product again (literally looked it up in my orders and bought the same product again). Photos and description were as expected. When I received the product, it was only upon closer inspection that I realized it was ridiculously cheap. Most of the back of the case is completely mock plastic. They come in an extruded aluminum…

There are a lot of user error reviews on this product so I decided to step in and help you with a potential purchase of this item. I have owned this set since September 2015 and have had NO PROBLEMS with it. They are installed instead of my factory fog lights and I only use them for fog, rain and off-road. I have led them through mud, heavy rain, thick fog, snow, ice, sleet, swarms of bugs. and extreme heat (112+ degrees Fahrenheit) in Death Valley. I've never had a problem with these…