NO LEAK T Adapter Shut Off Fiber Polymer Reinforced Review

Valve complete with bidet - nonsense - no disrespect but it's true. This valve has a real metal stopcock instead of a metal pot, handy fittings, etc. Don't think twice about buying a bidet - just buy it. Simplifies the installation of the bidet.

Very easy to install the hose under the toilet tank. I just use some teflon tape on the joint to prevent leakage. This is a very good connection for my bidet spray! The valve works well and is easy to turn to adjust the flow of water to the bidet sprayer. The material used is of relatively good quality.

I bought this to have a second shut off in my toilet after installing the bidet. However, to my disappointment and although it's a pretty good design, it's just a switch between two streams. So I can either turn on my toilet or I can turn on the bidet. 20€ is absolutely not worth it

I've looked around at major retailers and plumbing companies but couldn't find the fitting I was looking for. It was a great discovery for me and having a check valve is an added blessing. (Many don't offer this.) The light is solid, well made and very easy to install. The price was exceptional in my opinion. In addition, it arrived very quickly. If you need this type of mount I highly recommend it.

I've never had a bidet, it used to have a solid metal tube and ends connected, not plastic. When we moved in I tried to fit it into the new tub, which was all plastic and leaking. I tried several different parts but couldn't get any of them to work without leaking. I replaced it with this one and with no tape, sealant or anything else, it all worked perfectly. Didn't even need a tool, just finger tight and no leaks. An amazing find.

My only concern with installing the bidet seat was that it might leak. This T-valve adapter is the perfect solution to prevent this. It's easy to install and even easier to use. In the "on" position, water flows into both the toilet bowl and the bidet seat. When switched off, water only flows into the tank. It's also a much better adapter than the plastic T-flaps that often come with bidet seats. PS: If you don't have a bidet, you don't know what you're missing out on!

I bought another (metal) tee which ripped my plastic fill valve (well partly my fault) rendering my toilet unusable . When the plumber replaced it he said my toilet was only compatible with plastic fill valves (I asked for a metal valve so I wouldn't screw it up again) so I returned the tee and bought this one. I was horrified by what happened before but I installed this one very carefully which came on easily and securely. I've been using it for a few months now and it works as advertised with

I like the quality. Pleasant to the touch, the materials are excellent. I don't like that this "universal" adapter doesn't fit my new bidet hose. The lever/valve is very smooth and seems to work perfectly. But I can't connect yet. I need to find an adapter or buy a 1/2" to 3/8" umbilical. It has a 1/2 inch bidet connection. My Tushy bidet came with a 3/8 inch water hose connector. The same type my toilet uses for water supply. Now I have to wait another week for a new part before I can finally…

This is exactly what my bidet Neo 120 needs. The problem with most bidet heads is that the water pressure from the wall is too high for the control valve on the bidet. Reducing wall pressure to keep your bidet comfortable means your toilet will fill up for at least 20 minutes after each flush. The solution is this T-valve. My bidet is amazing thanks to this adjustable T-valve. I can still have full pressure to fill the toilet and reduced pressure in the bidet to keep the regulator knob working…