NSI TOP-L-D Easy-Twist Large Ceramic Wire Connector, 18-8 🔌 AWG, 600V Splice Wire, Max 1000F, White, Pack of 15 Review

Used for a stove igniter. The first one I tried came off easily with little pressure, so I ended up using three instead of two.

These ceramic twist caps were used in the conversion from halogen interior lighting to LED. Requires high thermal insulation. Well done.

I use these in place of crimping or soldering connections between trailer lights and trailer frame wires. They are great in sea water! I screw them in and then seal the hole with silicone. Then when I have a problem with the light or need to replace the lamp, it falls apart easily. Then simply cut off the ends of the new wires and reuse.

Needed for a cord in my gas stove that broke and kept shorting out. I've tried both medium and small, and the small fit better. They don't hold the wires well (if you pull the connector it comes loose) as there is no metal thread in the nut. However, I used fiberglass tape to wrap the wires and nut so it wouldn't go anywhere.

You should use these high temperature types for more than the environment/regular home/car. Smokehouse along with a higher gauge wire. The kit I used consisted of ceramic nuts (as the plastic softens and loosens), high temp cables and high temp connectors. https://www.amazon.com/gp/product/B001ALN0JGhttps://www.amazon.com/gp/product/B008KNMONKhttps://www.amazon.com/gp/product/B0071NCA48They are also useful for repairing burners , small electric heaters, etc.