SOKOL computer table KST-14, corner: left, WxDxH: 140x123.5x182.8 cm, color: sonoma oak/white Review

Terrible experience! First of all, because of the sharp thin edges along the entire contour of the headset, drawer fronts and the supporting leg (side board under the table top). A normal rounded edge of 2 mm is only on the table top, which is made from an ordinary thin board of 12 mm and flexes under the slightest pressure at such a length. Not only is it simply unpleasant to touch sharp edges with your hands, but also abrasions with scratches in the child remain on the arms and legs! This is…

In general, the table is excellent, although it was used only in the evening. Later I will try to supplement the review (if I don’t, then it remains so :) everyone likes to write negative reviews more) I leave a link to the disk with instructions on the right side here (there may be some blunders in numbers, as it was done on the knee in a hurry, but it's clearly better than "reflecting" the entire assembly in the head. )

Very satisfied with the table. I collected it for a long time and it was difficult, because I did it for the first time and I had to google the name of the parts)) But in the end I managed and use it with pleasure. Delivery was on time, well packaged.

Overall a good table. there is where to place two 27 "monitors, a computer, ups, an oscilloscope, and a bunch of other little things. During assembly, one low-quality superstructure shelf came across, but it was replaced without any problems. and even more, they sent the whole set of shelves. I made an additional shelf out of one of them. The additional surface is too low, it would be more convenient if it was level with the main table top, while being the same in width. then it would be…

Almost all panels are damaged. At the same time, the lifting doors are all damaged on the visible side, on one of them the damage is painted over. 2 drawer fronts are also damaged, one damage was painted over. There are two dents on the table top right in the middle. So almost all the damage is in plain sight. In operation, it turned out to be roomy, there is a lot of convenient space for office equipment. Only 2 silicone stops for facades, which is why the rest knock loudly when closing.

The table layout itself is not bad. But the price goes down in everything, which is surprising because at the output it costs 17,000. Definitely not worth the money. For manufacturers. Make two or three versions available. Call this table economy and sell for 10,000. Then the standard option. With good facades and good fittings for 15000 Premium option. With good fittings, facades to choose from, a good countertop for 23000

The table approached me in size and purpose, so I was ready to close my eyes to the shortcomings. If you advise to buy, then only after inspection and acceptance of shortcomings.

took at a discount with delivery for 11500 approximately. In general, I ordered this table-shelves, according to some reviews, a broken one came, I think suddenly a broken one also comes, I decided to pray that a good one would come, I ordered, prayed and a really great table came. So thanks to God and to you

They looked at the price of 18k for a long time and it seemed a bit expensive, but once they lowered the price to 12,500 and 800 for delivery and immediately took it. + cashback around 1k. So for 12k I think an excellent table.

In principle, the table is completely satisfied. The assembly process was a little disappointing, but that's over). If anyone is interested, the gap between the cabinet and the wall is 5 cm, so it is quite possible to place all the necessary wires there, but the plugs must be L-shaped

They brought one box of what you need. And the second from another table is a different color. Issued a refund. How much effort and nerves it cost me to pack everything back. ‍️ Such a bad ordering experience. Tomorrow, wait for the courier, and then also wait for the refund. I will not reorder. It's a very difficult return.

Bought for a first grader, large countertop! 4 convenient drawers, for the upper doors we removed what we rarely use, The husband assembled it himself, the instructions were clear, he assembled it quickly and easily, the only thing was that the details were not even laid out with paper, they were stacked on top of each other, scratched, plus a couple of chips from transportation, but on invisible sides. and when assembling the rack, the holes did not match a little - one of the shelves…

So in general, everything is fine, the table suits completely, but the impression was spoiled by the fact that one of the back walls of the rack came broken and with a crack. I would like a more responsible approach when assembling a complete set before shipping. And, just as a tip, make it easier for people to assemble, make the instructions more detailed, at least a picture with the name of the fastener, so as not to guess where the 45 × 16 screw is, where the eccentric is and how they should

Got pros: Price, large table surface - enough space for a computer and writing space (or for two monitors), a lot of shelves where you can put something, you can choose the location of the cabinet, I liked the color Got cons: 1) Damaged upon delivery: there are dents on the table top (but on the bottom side in the corner where it is not visible) and chips, the side part is poorly glued or fixed - it is clear that it will move away quickly, the corner of the door on the front side is chipped. Th

A good table, all the holes are drilled correctly (I read reviews that the holes are not where they should be, many have scratched parts, I even thought of refusing the order, but everything is fine), only the hinges were put on with a closer, a slight wear on one part, as they dragged, all big parts in one package, so it is very heavy. The working surface is spacious, the drawers are roomy, the A4 format fits.

In general, my daughter liked the table with the superstructure, she is delighted, and this is the main thing for me, as a parent. So not such a low rating. All design flaws can be finalized independently! But a wish to the manufacturer - refine the design and its elements, in particular the boxes, they could be equipped with telescopic ball guides, and not outdated roller guides. And the boxes themselves - there is not enough strength and rigidity of the structure!

I read a lot about damage to the elements of the table, but no, everything came whole, one assembled in 2.5 hours, available instructions, fasteners with a margin :)

Great table, functional. For a student, it's great. Easy to assemble. Arrived intact, not a single scratch. We will make repairs in two other nurseries, we will order two more .

Such goods must be taken at the entrance, but brought to the apartment and run. While he examined the boxes, Mitka spun the couriers.

I had to slightly modify the departure of the boxes to remove the gap between the wall. I put dampers on the top drawers so they don't slam when they close. I also replaced the drawer guides with ball ones. It was delivered without damage.