Computer chair Bureaucrat KB-8 for executive, upholstery: textile, color: black Review

They write no fixation. But for 5 thousand - what kind of fixation guys? They write a hard seat - did not notice. not so tough. if you lean back, it's comfortable. On the one hand, this still does not interfere with concentration, on the other hand, it does not allow you to comfortably fall apart and score on breaks in work. - valuable quality.

The assembly is 2022))) well, this is a problem not only for this chair, but also for many other maid in rush. In my case, out of 4 fastenings of the chair to the base, only three holes are made evenly, and one simply does not fall into the grooves. That is why she is ours . our 2022))) Attaching photo. There are others in my office! They are great. Better take the bureaucrat t898! It's just awesome! Like if my review helped you)

Low price, clear and easy assembly. Good quality materials. In general, the chair is good for everyone except for one, ON IT IS TERRIBLY UNCOMFORTABLE TO SIT. The back of the chair is simply impossible to adjust, it constantly presses forward and a rather rigid seat. I bought it, suffered for 5 days, disassembled it and bought another chair.

I recommend to buy. Pros: Fairly simple assembly. Convenient to use. High back with comfortable headrest. Back stiffness adjustment. Good seat height. Cons below: Not all bolts have gaskets. Perhaps this is not critical, but I'll find out for sure later.

Well, it's definitely not 5 stars, but it's worth the money. The assembly of course caused a little difficulty, due to the very short instructions, but I coped with it pretty quickly. Complete set, everything is in place. All bolts are included in the puzzles. I bought for 5800. I return it because the back support is too soft, it does not suit me.

We contacted those. support for the store selling these chairs, and in . They promised to replace the chair, wrote to the post office a couple of times, asked for product data, everything was answered. A month after the appeal, the chair has not yet been replaced and they do not answer the mail. Adding a review: They sent us the back of the chair by mail, she arrived, as a result, the same curve (the same problem).

Bought for my husband's birthday, he loves it. There is a nuance - if you lower it low, then the bottom part of the body will scratch the floor. Strongly. Otherwise satisfied with the product.

With its pros: Large seat, good backrest adjustment, the ability to remove the armrests Cons below: Squeaks, collects dust, it is desirable to make the seat angle higher

After reading the reviews I was scared to buy a chair. However, everything worked out, we did not have a marriage, the assembly went smoothly. We have bought Bureaucrat chairs before and they have never let us down. The chair is comfortable, with a high back, for 4800 it is difficult to find an alternative to a light chair with a high back . Let's see how it will be in operation .

As a person with problems with the spine, I rejected this model after a week of use. The position of the back of the chair is not only relaxing, but gives the impression of twisting the back into the shape of a chess horse. In an attempt to lean back, the head rests on the upper curve of the chair and further tilt is accompanied by discomfort. There is no feeling of full back support and over time this makes itself felt by tension in the muscles of the neck and lower back. ps I bought it on…

This is the impression after a day of use, which may improve over time. After the first hour spent in the chair, it hurt in various unexpected places, but then the body adapts and now only the lower back hurts, although I can’t remember when it hurt before getting to know this unit. I had a break of 2 weeks - my back stopped hurting. I started to sit on this apparatus again - my lower back began to hurt stably after 6 days.

For the price, this is a pretty good chair. I didn't have any problems with him. True, two identical parts of fasteners were included in the kit, so it’s better to check the completeness right in the store.

Has pros: Wide seat, comfortable for people who are overweight or to sit with their legs crossed. Different cons: The seat turned out to be crooked, the back gets very tired from the warp. The back is not fixed, but at the same time it leans back tightly.

A comfortable chair, but there are technical shortcomings (described above), you need to be prepared for them. I can’t say that the optimal ratio of price and quality, in my opinion, is a little expensive for such quality ((( When working for a long time, two or three times a day, you have to adjust the height of the chair. Got pros: A comfortable chair with a correct back and small armrests (they do not interfere with work, but they help when you just want to relax and watch a movie) Has some…

Has some pros: The mesh back and textile seat are an indispensable element for the southern regions. For two years of use, the cross with wheels did not cause any complaints either. Has some cons: Subjectively: an uncomfortable inclination of the upper back. Perhaps blindly did not guess with the height.

Has some pros: Nothing sweats, tk. mesh material on the back. The back itself is made taking into account the anatomical features Some cons: There is no fixation of the position of the back of the chair. The back itself creaks with a slight movement.

Different pros: There is none of them. There are no tilt settings, the mechanism is pricked on the seat. With its cons: Gas lift broke in less than a year. And this is given the lack of opportunities to ride and so forth.

In general, a good chair for 5000 (I took it for such a price tag). Has pros: Comfortable armchair. It rides well on linoleum while it does not crawl from the slightest movements, but rubberized wheels will most likely be needed for laminate. Pleasant to the touch. With its cons: The back wobbles slightly. Adjusting the stiffness of the back does not actually change its stiffness in any way, but it still feels comfortable, although it can be harsh for some. The handles are attached with 3 bolts