💼 Online Best Service: 6 Pack of 2" Low Profile Swivel Caster Wheels for Creeper Service Cart Stool Post Mount Review

I was glad to find a product that would fix an old Harbor Freight vine I have. The old wheels were worn out and some broke off. I hate just throwing it away so this at least fixed the unit as 'like new' and maybe even better. Let's see how these wheels stand the test of time.

These wheels are a perfect match for what I used them for and they appear to be well made. The spike is designed for use with a 3/4 inch blade. So if you plan on using it with a 1/2" or 5/8" blade, which I did, you'll need to use two or three washers on each hoop. to tighten them, otherwise you will have to cut the bolt and nut to make them work.

So they are definitely not as good as OEM but my Craftsman wheels were burnt after 20+ years and paved road. They are round and fresh and are meant to help. But. Slewing bearings are half or less than OEM. See image. Squeezing them to the vine without restricting the swing is more art than science. I rate them as "good enough". ,

Arrived quickly and especially suits my 20 year old Craftsman vine. My Creeper has 1" square tubing. These new reels fit perfectly. They have more threads in the cap nut than the original (hence the original failed in my opinion). They removed the old ones, lubricated them with threadlocker and put in new reels .Light.They turn easily and the wheels turn easily.

Nice looking product but not very reliable. I installed them on a standard lead screw that I only use a couple of times a year and all the hubs have failed where the wheel is now rubbing against the metal. Low product quality. Note: Seller Support stated that they only offer a 30-day warranty. Worst so-called "warranty period" in the industry. Spend the extra money up front on another product that will last and has a decent warranty.

Ordered these to replace the wheels on a work stool. The bolt thread is listed as 5/16" but the tolerance is terrible. The supplied cap nuts will not fit as both sides do not connect cleanly. In my case I had to use standard 5/16" nuts. and only 2 of 4 bolted on without the need to punch clean the threads.At first I thought maybe some metric studs were mixed up, but after checking the threads with a good quality thread probe, it turned out the threads weren't to any standard - just very poorly…

I bought these to replace the OEM on my Cobalt Creeper. I work on my cars myself, so I'm not an avid Creeper user. These reels are significantly better than OEM. The bike is more important. Since I'm not in a dusty environment, I decided to spray the bearings with lithium grease. In doing so I found that they have a bearing on either side of the bolt where it goes through the wheel housing. This is a huge improvement over OEM reels. I also lubricated the bolt threads with blue locktite to…

The price is a bit high. I can get a brand new Creeper through HF for a few bucks more. The design is slightly different. The originals had flats on the outside of the upper bearing housing. They have a tiny flat bolt area above the bearing. None of my keys are suitable for this. there is no place I put my lock washers from the old wheels under the lead screw tube and right over the wrench flat. That was the only way they could tense up. The lock washers dug into the bottom of the tube and into

Ordered these to replace wheels on a work stool. The bolt thread is listed as 5/16" but the tolerance is terrible. The flare nuts that come with these units will not fit as both sides do not mate cleanly. In my case I had to use standard 5/16" nuts and only 2 of the four bolted on without the need to punch clean the threads.At first I thought maybe some metric bolts were mixed up, but after checking the threads with a good quality thread gauge the threads were not standard - only very much so…