4PCS SMARTSTANDARD 28" Metal Hairpin Coffee Table Legs - Industrial Home DIY Projects For Furniture, Bench, Desk & More Review

I was impressed that the company sent me a "Thank You" note along with some nice printed instructions on placement of the legs depending on your project. No other table leg company did this. The legs themselves appeared to be well made although one leg had a tiny speck on it that could have been a metal shaving that did not get taken off or got caught in the painting process. Also the bottom rubber table leg protectors did not stay on well. But despite what I said, I was impressed and would…

I needed a desk for work from home life and since I have 3 monitors, I needed something long. I decided to make a desk out of a solid oak door with a glass top. I needed hairpin legs that were made to hold the weight because the top is HEAVY. These legs fit the bill. They look great and are very sturdy. My desk is to die for and for about a $200 total investment. The one issue I had is trying to get my drill straight while putting the screws in because the angle gets tight but it was only 1…

Bought 8 for 2 projects. We were really happy with these results. Didnt use the knobs. Super sturdy, even with the stone top and wood supports. We went with six pins because of the length of the top. Spray painted in gold to match the metal chairs we also painted to match. Love ❤️

Bought these to turn a hevea (rubberwood) butcher block into a desk/sewing table. I was originally going to order legs from another merchant--the products themselves were identical in price, but the other merchant wanted over $40 for shipping, versus getting these well rated table legs from revain with free shipping. These arrived super quickly, and were well packaged to ensure the legs didn't rub or scratch one another in transit. The product box itself (not the outer revain box) had a hole…

This legs are heavy and very sturdy. I was really surprised when I realized one leg was shorter than the others. Of course this made my table all wobbly. The company is not easy to contact AT ALL. I had to call revain and they put me on hold and came back to say I would have to return all four legs and I only need to return the one. Now I have to remove ALL the legs and haul them all to a UPS store to return them all. They aren't light either! I was disappointed that revain wasn't able to offer

I had an IKEA tabletop that was previously attached to a bookcase. I decided I wanted to use these legs to give it an updated look. Love the way it turned out! Note: The screws that came with it were almost too big (1 3/4") so I opted to use 1" screws just to be on the safe side. Love the way it turned out! Very sturdy. If you are worried about scuffing the floor, the legs came with 4 black end caps. I don't need it right now but I am going to hold on to them in case I decide to move the desk…

I decided the Sunday before Thanksgiving that I needed a 9' table to accommodate all my dinner guests comfortably. I did the design and my amazing husband built the table. I ordered these legs on Sunday and they arrived Tuesday evening at 7:55 PM - just as my husband was going into full panic mode that they wouldn't deliver in time. My husband was very skeptical about the quality when I showed him what I had ordered. When they arrived, his mind was completely changed. He was VERY IMPRESSED with

I needed sturdy legs to make an accent table from a slice out of a wooden telephone pole. The piece of pole weighs about 40 pounds so needed something sturdy. These were easy to attach. I did use 3 inch wood screws rather than the ones supplied with the legs. We put a screw into every hole available (7 per leg) as we wanted it to be secure. I really like the way it turned out. I will note the little rubber feet did not stay, so I glued them on with Gorilla super glue. That did the trick. As a…

Very easy to install excellent for at home projects like sofa tables small buffet tables great product my third time ordering orderingAre use the product for sofa table and the second time I used it for the fee table unfortunately I don’t have photographs but I will work on getting some excellent product have use some three times priced extremely well

I bought these for a butcher block end table and they are the perfect height for that. Solid construction, no sloppy welds, and nicely finished. The attachment end is also very good sized, but the user should know that it is designed have a minimum depth on the screws of 1 5/16" wood to screw into.The single downside to these legs are the snap-on plastic feet that go on each one. So long as the table remains in one place, these will probably be adequate but are likely to eventually fall off if…

I purchased two sets of these for home-built coffee tables. The are used to support 2" thick mahogany slabs. They are solid, welding is good, and the mounting plates to the table are reasonably level. I'm satisfied with the quality - both tables have been in use for over a year.

These 18" legs are great!They are solid, heavy, and have no imperfections.Very easy to install, took me just a few minutes to install all 3 legs on each accent table I made. (3 leg triangle pattern worked best for these small tables, each roughly about 18" across)I used these legs on wood slabs (after sanding and varnishing) I cut from logs harvested from my property.They turned out beautiful, and I will definitely be purchasing more leg sets for future projects!FYI: These leg sets are made in

Overall, the product is well made and consistent from one leg to the next. The price is fair. I bought a total of two sets, 8 legs total, so I got a relatively decent sample size to review. The welds were not necessarily pretty but appropriate for the price point. They were consistent and appeared to be reasonably well cleaned. There was no welding splatter on any of the metal work. The two major issues that I had with the product was first that the screws they supplied are basic drywall…

The legs seem like they will be great legs. However, I am unhappy with the screws that came with them and the feet. The screws look like drywall screws and are very skinny with a tapered head (Y), not a flat head (T). I’m going to buy new screws. The rubber feet are also undersized. These are clearly meant for legs with 3/8” diameter rod. I bought the 1/2” diameter legs. They don’t work and they definitely won’t stay on. I’ve bought 1/2” legs on revain from another dealer and they gave me the…

Pretty decent hairpin legs. They seem well built and sturdy with nice black color coating. The only issue is that they were wrapped together in pairs and the feet of the legs were left in contact without anything in between, so the black finish was chipped off in a few places toward the feet end of all four legs. Not sure why they weren’t all four wrapped individually, but I’m sending mine back as I live in a high humidity area and don’t want to try to seal the exposed metal myself.

I found a table without legs in clearance section at a local store. I was hesitant when choosing these for a dining room table. I thought they would not be sturdy or that they would look weird. After having to send back because I ordered the wrong height (bar stool size) I almost gave up. Luckily, I got it right the second order and I love them. They are sturdy and look modern. I ended up taking a old buffet table and painting to match the table and adding the same legs. Great buy. Wooden leg…

Overall, it’s a great product and seems to be well made. Only problem I had is that they came in a bit damaged towards the bottom of the legs; all four of them were scratched and had paint chipped off, but they still worked fine and the damage wasn’t as visible when completely setup. Shipping was not well packaged either, the box came in damaged and open, and not well packaged inside. I think if the product would have been packaged well, it wouldn’t have arrived scratched with paint chipped…

These legs are beautiful and worth it for the price. However, two of the four came with some imperfections with the finish. These can’t be seen now that they legs have been installed, but it was somewhat of a bummer to receive these in such condition. On the topic of receiving my package, the box was completely insecure. The tape that was holding everything together seemed like it was going to fall off when I carried them up the stairs to my apartment. The legs were also loose inside the box…

The legs came well packaged, with all the hardware. They seem beefier/sturdier than I expected, so we’ll see in time if there are any issues that some 1 and 2 star reviewers describe. We used the legs under a 2 inch thick plank of raw edged oak to make a console table that I am using as a desk for now during covid stay at home time. The legs were a bit of a pain to install since the angles of the individual spindles did not allow for use with a drill or even a straight screwdriver, and half the

Strong table legs.They came well packed in 2 boxes.All screws received.The price of this set is a little higher than the other legs on revain. However, these legs have 3 vertical supports on each leg, not 2, causing extra weight, and packed well, hence higher shipping cost.I just wish these were available in the 2 vertical supports on each leg version rather than 3. Personally, I like the look better.They look good and are strong which matters the most to me.