Header banner
Revain logoHome Page
pressure transducer sender sensor stainless hardware logo

Pressure Transducer Sender Sensor Stainless Hardware Review

4

·

Very good

Revainrating 4 out of 5  
Rating 
4.0
🔩 Nails, Screws & Fasteners, 🔧 Hardware

View on AmazonView on ЯM

Media

(4)
img 1 attached to Pressure Transducer Sender Sensor Stainless Hardware
img 2 attached to Pressure Transducer Sender Sensor Stainless Hardware
img 3 attached to Pressure Transducer Sender Sensor Stainless Hardware
img 4 attached to Pressure Transducer Sender Sensor Stainless Hardware

Description of Pressure Transducer Sender Sensor Stainless Hardware

±2%FS small output error, full temperature range, high sensitivity and accuracy. Stainless steel body, with high quality ceramic pressure chip. Complete surge voltage protection function, safe for use. Light weight and small dimension, convenient to install and operate. Widely used in oil tank, gas tank and diesel tank to detect oil, fuel, diesel, gas, water or air pressure.

Reviews

Global ratings 4
  • 5
    3
  • 4
    0
  • 3
    0
  • 2
    0
  • 1
    1

Type of review

Revainrating 5 out of 5

Product quality is good for threaded rods and bolts

Impressed with the quality. Used as a fuel pressure sensor for my experimental aircraft. The tension was very accurate. Previous sensors were very erratic in their output.

Pros
  • Nice packaging
Cons
  • Protection

Revainrating 5 out of 5

Works really well.: Threaded rods and studs

I used 2 of these to build a S15 SR20, my ecu needed fuel and oil pressure to provide failsafe. They are very reliable, I bought another kit to build the S13 SR20.

Pros
  • Decent performance
Cons
  • poorly thought out

Revainrating 5 out of 5

Good price and good product.

I bought 2, one for diesel and one for exhaust pressure. I've ridden them several thousand miles and they work great. Very happy with them. Harness braids also go very well with the seal. The wires are only 20-22 gauge but they are adequate and well soldered. I would buy them again with great pleasure.

Pros
  • Hard Finish
Cons
  • No

Revainrating 1 out of 5

Failed in less than 1 week

The 100psi converter ran for about 5 days and then began measuring the 5VDC (112psi) output voltage intermittently. A day later it stayed at 5VDC the whole time. The application was good (potable) water pressure with a cyclic pressure of 40 to 65 psi in a room with a temperature that was always around 70 degrees Fahrenheit. This was a replacement sensor from another Amazon supplier that also failed in a similar way. It seems that a large number of these converters are sold by multiple Amazon…

Pros
  • Excellent design
Cons
  • Replacement available