🔌 SKS Presta Adapter with Chain Floor Pump Spare Parts: Enhance Your Pump's Versatility with Spare Accessories Review

This device is used to adapt a pump with a Schrader valve cartridge to a pre-valve on a bicycle tire. It works well and seals the presta valve well to the tire. Just make sure the Schrader chuck it's going into is threaded. They're not that common anymore. It didn't seal very well when used with a quick release lever that jammed the Schrader cartridge. I ended up using a piece of epoxy in the Schrader cartridge and making the connection permanent. Aquad, but it works.

All mountain bike tubeless valve stems are Presta valves. When you put a bead on a tire to "seat" it on the rim's shoulders, you have to quickly pump a large amount of air into the tire to "inflate" it to make it pop off the rim. The most efficient way to do this is to remove the Presta valve core to allow max airflow. I already have a 1/4" NPT ball to ball air chuck (all gas stations have this type) but I need to interface with an external Presta valve body. This SKS adapter is perfect for the

It didn't work and I had to buy Presta type screw converters. I have to move and struggle to take it off after use and I lose air in the process. I bought it because the bike shop recommended this type, but it was out of stock. I would only buy a screw type if I did it again. I got 5 of them for less than I paid for them and they work better. I figured it would be more convenient than the bolt-on type, but I would only try it if you're going to be filling tires all day. Otherwise it's not worth

works great with my battery pump! Much easier than bolting on traditional Schrader Presta valve adapters. You'll have to push it down a bit to keep the seal in place, but most bike tires inflate quickly enough that this isn't a problem. If you are using a battery powered pump, just make sure your pump is delivering centerless air. Pin pressure on the Schrader valve. The easiest way to check this is to see if your pump is pumping air when it's not connected to anything. If it doesn't, your pump…