Q230 30 Amp Double Circuit Breaker Review

I needed to replace an old 90A Gould switch but couldn't find it locally. Apparently 90 amp switches are not commonly sold but I needed that exact amp rating for a central heating system. Anyway, this one worked great replacing Gould.

You can't attach the wires to the switch without the locking screws. It's basically a paperweight. The screws are patented so you don't have to go to the hardware store for a replacement. So it's useless. WHY IS SOMEONE SELLING THIS KNOWING THAT THERE ARE NO SCREWS? 🤦‍♂️

ese breack es usado y no nuevo como dicen , ademas no funciona bien, no compre eso , NO RECOMANDO QUE LO COMPRAN! , Es Una VERGUENZA Que Revain did not answer from the guarantee alone porque yo vivo in Dominican Republic, but then sell and pobliciza su pagina en este pais , so it una gran ESTAFA!

I haven't had much luck ordering switches from Revain as most of the time there isn't adequate information for different panels. I recently worked with three different panels. Last order arrived in 7 days and then there were wrong counters, time is money. continued when I stopped by the local Perrys supply center yesterday. I grabbed two circuit breakers as needed and a 50A bipolar fuse, which I had a hard time finding at Revain, and got back to work installing everything in 40 minutes.

Quality switches at an affordable price. If you are not very familiar with household wiring, hire a professional. If you are doing this yourself, be sure to leave the switches off until all the wires are connected at both ends. This is a 40 amp switch, so depending on the length of the run you'll be working with #8 wire or more. This material is tough and difficult to handle. Be careful!

Recently bought an old house with a main panel that was in poor but good condition. I'm obviously planning on replacing the main panel in the near future. In the meantime however the weather is changing so I have shifted all major loads to a brand new (reliable) auxiliary panel which can also be powered by a generator if required. I used a 90Amp main circuit breaker in the subpanel in combination with a 50Amp circuit breaker for the Genny, using a simple switch arrangement in between for…