💡 Siomen 6" LED Light Engine Retrofit Kit: Energy-efficient Ceiling Fan Light Upgrade with 2100LM, 3000K Warm White Glow Review

I purchased this item to replace the original light that came with our ceiling fan which worked fine but was not bright enough. When I received my purchase and started installing it, I realized I had ordered the wrong size, which I was wearing. However, the lighting fixtures did not envisage the use of standard pull chains on ceiling fans, i.e. there were no openings to allow the use of pull chains for lighting and fan control. I still have the light and plan to use it somehow. It seems to be a

I've had this old magnifying glass desk lamp for many years - it had an 8 inch fluorescent bulb which wasn't very bright. Haven't used it for a long time - too many issues with the kind of light it gave. This LED is 9 inches in diameter - and after removing the old light clips - and the magnifying glass (which I rarely use anyway) - I was able to just squeeze this new light in, I had to bypass the ballast transformer - which was very easy. Was very pleased - now the lamp is much lighter without

This LED unit is lightweight and easy to install BUT note that it is intended to replace the incandescent or fluorescent tubes of the original fixture. Some do-it-yourselfers may find it difficult to remove bulbs and sockets, and if they are fluorescent, remove ballasts and terminals. To prepare an old light fixture for LED replacement it may be necessary to remove the entire light fixture - a drill may be required to remove rivets or other fasteners. Remember that you need the original…

. We upgraded seven year old Hampton Breeze ceiling fans with 75w E11 halogen bulbs with these units. The first light lasted 40 minutes due to the learning curve and the rest took about 15 minutes each. The magnets that attach the headlights to the fan frame work great when cleaning the old thermal insulation materials. The 4500K versions are nice and bright, but not dimmable. That's not a problem for us because we want the light to be bright when it's turned on. LED lights are easier to…

If you get something like this, replace something that doesn't work or doesn't work. So it doesn't fit all fan models including mine. There are magnets and pre-drilled holes that look great but don't fit my fan model. I could have drilled holes or used other screws but I didn't care. Installation was easy, but it's not as easy as it looks. As they say, it's great! Super bright and installation was easy but be aware it may not fit perfectly. But be creative and solve problems. This thing…

I couldn't find a ballast for our Windward fans and was tired of replacing 9" round tubes. So, before replacing the fan and light, I decided to try these round LED lights. Very easy to install. I wasn't thrilled with the wire clips so I cut them off. Installation was pretty easy. I removed the ballast block and trimmed the power wires, leaving as much length as possible. I connected the wires to the electrical connectors with a wire and then checked the light. Worked on switch and remote…

I've been trying to replace the LED in my Harbor Breeze outdoor ceiling fan for 6 months. I spent hours trying to figure out where to get replacements for an LED that was destroyed by lightning last August. I went to the box store and they referred me to Harbor Breeze. They had no idea even after I gave them all the numbers on the device. Very frustrating. I've researched online for more hours with no luck. I decided to try the secondary light. They come in different sizes so I got all the…