🚗 Catalytic Converter Exhaust Manifold Gaskets Set Front Rear - Compatible with 1999-2006 Subaru Impreza Forester Legacy Outback 2.5L H4 Review

It shifts O2 forward too close to CV. Also installed and received after 2 months P0420 with 2 new quality O2 sensors. A friend also bought one and had a code with O2 sensors within a month.

The tube is the correct size and angle for my application but the front seal is leaking and will likely thin to accommodate assembly errors. In addition, the mounting hardware for the front was too large for the holes in the header bracket.

Gave me a check engine light. So bulky that I had to use and bang the screws to tighten them because they were on the side of how much larger it was. In addition, the supplied screws are too big for the original. The center hanger is misaligned, causing the retiree to ride sideways on the sign. My client didn't like it and I lost the business. Thank you Revan

Well built. Installed on my Förster with a new center pipe and new 02 gauge. My check engine light was fixed due to the low cat function. I use a gasket on the O2 sensor to hold the CEL in place that causes the exhaust manifolds to fire. It worked with this app. I had a little trouble aligning the center tube of my walker (OEM style) but it ended up fitting.

This product and seller deserve zero stars. The converter failed after only two months and the seller will not refund me for this defective product. I replaced this converter with an Ost converter almost four weeks ago and my machine is running better than ever! No "Check Engine" codes for the converter as is the case with the MOTOOS converter.

Works as expected. Direct Fit. It is recommended to pull out the collectors and install them on a bench. All the gear it came with seemed to be for a big truck as none of them fit my Subaru and I had to buy the right gear. It took a while to get everything right as no aftermarket part is 100% perfect, but you can get it working with a little convincing. Would have given 5 stars if it wasn't for the hardware issue.

Maybe not on all machines but I found it awful. The hanging bracket and both ends didn't line up properly with their respective screws, and I manually bent parts of it to even get it to fit. exhaust leaking. Sooo I wouldn't recommend. Doesn't match my code, causes more problems. If you're getting this to fix code P0420, check everything else first. In my case PCV

I bought this Cat system to replace my expired OE system and it will last in all respects but not as well , as you would have wished. The compression ring is too bulky which doesn't provide a perfect fit and good luck installing the rear spring bolts because I couldn't. I had to use new bolts with old springs, which again is far from ideal. The head side bolts are too big to even go through the head tie plate so you need to recycle those old bolts. Due to a bad installation, this solution will…