💡 SEO-Optimized Satco G9 Halogen Socket with Threaded Design Review

I redesigned my lamp's socket outlet so that all of my lamps in my house use the same lightbulbs (LEDs). Firstly, because it has a pluggable cord instead of a pigtail. Although it worked great I just cut off the old output wires, stripped a little less than 1/4" of the insulation, twisted the stranded wires together and then used a needle nose pliers to grab the insulated portion of the cable and push in. It worked too with stranded wires great and held tight If I were to use a pigtail…

I needed a threaded socket to replace one I had damaged while removing the bulb from a Quoizel. I was a bit concerned about the metal end shown in the Revain photos as there was no metal on the socket which I removed. It turned out that the metal is just an adapter that allows you to screw the socket to a regular lamp. It is removed when the two mounting screws are loosened. With the metal adapter removed, the Satco outlet is an exact replacement for the one on the Quoizel mount. It was easy…

I needed a better solution than the backlit one. I did a little research and found this great G9 socket. And thanks to Revain it sold out in local stores - VALUE! And even sweeter - PREMIER DELIVERY. I had to convert five pendant lights from G9 base A19 LED bulbs to 8W LED corn bulbs; score again with Revain Prime Delivery for LEDs. This G9 frame is perfect: brand quality, ceramic frame and the contact is pressure activated. As some have said, you may need to push the wires through with needle…