Header banner
Revain logoHome Page
uncover quality sourceone 🔍 raw materials for your project logo

Uncover Quality SOURCEONE 🔍 Raw Materials for Your Project Review

3

·

Average

Revainrating 3 out of 5  
Rating 
3.0
🛍️ Plastics, 🌾 Raw Materials

View on AmazonView on ЯM

Media

(3)
img 1 attached to Uncover Quality SOURCEONE 🔍 Raw Materials for Your Project
img 2 attached to Uncover Quality SOURCEONE 🔍 Raw Materials for Your Project
img 3 attached to Uncover Quality SOURCEONE 🔍 Raw Materials for Your Project

Description of Uncover Quality SOURCEONE 🔍 Raw Materials for Your Project

✅ PROFESSIONAL QUALITY. 1/8th thick Acrylic is the number one choice when you’re concern for safety and handling. It is stronger and tougher than glass, it’s lightweight and easy to shape or fabricate. Acrylic has a higher impact resistant than glass, but it still has similar impact strength. The lightweight of acrylic is also another great benefit. You’re able to use an acrylic sheet that is twice the thickness but still weighing about half weight of conventional glass sheet. ✅ MULTIPURPOSE- Acrylic sheet uses are glass window replacement, outdoor signs, lighting applications, and bending or manipulation. ✅ EASY USE- Acrylic sheet can easily be sawed, routed, drilled, formed, bent and cemented. ✅DURABLE SHIPPING- Our acrylic sheets arrive with Film Mask for Protection from scratches. ✅ MONEY BACK GUARANTEE. SourceOne products are always in stock, and we offer a money-back guarantee. Our fast shipping ensures that your order arrives fast, safe, and in top-notch condition. That means no damage, no scratches—the best condition possible. If you’re not satisfied with your order, we promise to return your hard-earned money. Customers like you are our number-one priority, and if you’re happy, it means we’ve done our job.

Reviews

Global ratings 3
  • 5
    1
  • 4
    0
  • 3
    1
  • 2
    0
  • 1
    1

Type of review

Revainrating 5 out of 5

Great item that can be easily cut with a laser or by hand

Hand cutting is tiring. Saber/Jigsaw/Circular/Spiral Saw Lightweight. However, the laser is easy/simple and by far the best way to cut. I use a 40W CO2 laser. I simply cut out 1 x 1 mm pieces. These are usually small details but some of the lighting engraving illustrations get great results with this product. It smells when cutting/engraving at high power - you would have to cut very slowly and at very high power to get the flame. I don't know why I should use this kind of setting but…

Pros
  • Plastic
Cons
  • New competitors have emerged

Revainrating 3 out of 5

Very Soft Low Melting Acrylic

I have done many CNC engravings on acrylic sheets. I had to do a test run on inexpensive plates before engraving the image on 1/4" acrylic plates that I bought from another company and used with great results. The test run was at 15 ipm and 30,000 rpm, which I did always do when I engrave acrylic. I found this sheet at Revain and then saw the Revain banner I bought in 2017 (thanks Revain!) so I looked through my stack of sheets and found it! Unfortunately it melted on one Test run on each pass…

Pros
  • Raw Material
Cons
  • No Car

Revainrating 1 out of 5

12 x 12 white 1/8 " breaks at sharp corners

I used clear 1/8" to create my wife's quilt templates and have generally had pretty good results. But it wasn't possible to cut a right triangle out of this 12x12 sheet. The 45 degree corners didn't break cleanly even after about 25 cuts with a professional knife on a clamped piece of metal to ensure the cut was clean. The first bad piece almost ruined the whole sheet. I broke between two pieces of clamped hard material on either side so there was nowhere to break, but it happened. Then using…

Pros
  • sheet
Cons
  • Could have chosen a newer model