🔧 Spectre Performance (29498) Stainless Steel Flex Fuel Line Kit - 3/8" x 3' - Enhanced with Chrome Clamps Review

Makes my engine bay look neat. The only problem I had was cutting it to the right length without fraying. It's easy enough even if you follow the instructions.

Part of my problem was that I was trying to connect the hose to two different sizes. I can fix it, but I have to wait for the parts. As for the ending, it seems a bit cheap and I need to check for leaks.

Only half of the 3 feet can be used. There are at least 5 spots on the steel mesh where there are scuffs, cuts or torn loops. As it was well packaged, as in the window, there is terrible quality control. Luckily I only need short snippets, otherwise it would be completely useless.

Unlike other items of this type, this one has a one piece clip cap at each end - as opposed to two pieces that screw together. That means you can't remove the cap to insert a hose or tighten a clamp - everything has to be blinded. Since the braided hose cannot be easily pulled onto the pipe, this is a major disadvantage. Also - be careful - fuel line sizes aren't really standardized, no matter what you may have heard or read. Please check your ID and OD carefully before purchasing.

line is fine; The clamps don't have enough clearance to fit the stainless steel sleeve properly, especially 5/16, so it would be better to just buy the gas line without the clamps. 3/8 clamps, with a lot of rework, barely match stainless steel, so I left a 3/8 line set to fix. However, clamps usually damage the internal rubber hose line due to their insufficient stability. The clamp bodies are nice, but the clamps themselves are almost useless. I would prefer to discuss this with the seller…