TeamProfitcom 12V PC PWM Fan Hub 5-Way Splitter - 2 Pack, with Sleeved PWM Fan Splitter Hub Adapter Cable for 4-Pin & 3-Pin 12V Desktop Computer Cooler Case Fans, 14 Inches Review

The wiring harness is VERY badly soldered to the board. Little did I know the cables were frayed and touching. When I turned on my computer, it didn't smell very good. I noticed the fans were spinning and then randomly stopping. I turned it off immediately. Now when I connect a fan to this header, it only spins at 20% of its rated speed. Titles fans can't control anymore, I suspect it got fried.

I got this splitter for my 4x Corsair LL120 RGB fans because my motherboard was missing headers and everything is working great so far! I really like the included sticky pad so I can stick the splitter to the inside of my case instead of leaving it hanging around somewhere. I only needed 1 splitter for all 4 fans and kept the second one as a spare/backup in case I needed it. I wish they had included more sticky pads so I can move them around as each sticky pad can only be applied once but I'm…

Generally good build quality. The shrink tubing on both ends of the cord is perfect. A good cable length to reach any 4-pin fan connector on the motherboard. My only complaint (I blame the USPS) is that all 4 pins on the hub bend during shipping. The pins touched, but they easily bent gently. The product came in a normal packaging envelope. Maybe a 3D printed disposable coating to protect the pens would help? Or a cheap little box or cover to protect the contacts? But overall exceptional value…

I bought this splitter together with my 4 Corsair LL120 RGB fans because my mainboard was missing headers and so far everything works great! I really like the included sticky pad so I can stick the splitter to the inside of my case instead of leaving it hanging around somewhere. I only needed 1 splitter for all 4 fans and kept the second one as a spare/backup in case I needed it. I wish they had included more sticky pads so I can move them around as each sticky pad can only be applied once but…

My Silverstone MLOB case has four 80mm ball bearing intake (3-wire) fans and the exhaust is extracted by two 120mm 2-stroke (4-wire PWM) fans on my CPU. I connected the device to SYS Fan 2 (pull fan) and this 4pin fan to the CPU connector of the device and then connected my two 80mm fans (in front of the CPU, VRM). It worked right away. I left the other 2 80mm SSD/HDD fans on 5V, now I control 3 fans on SYS Fan 2 with Speedfan. It even shows the fan speed on the CPU port. I tried a similar…

I first booted my computer using the 4 pin fan headers on my motherboard and connected 3 fans to each hub but none of my case/CPU fans seem to be doing this it does not work. turn on. I figured maybe I hooked something up wrong. I double-checked that everything was connected properly before realizing that one of the hub's wires looked alarmingly loose at the part where it connects to the hub. I checked another one (bought two packs) and it was practically torn and split in two. I'm currently…