High-Quality SUPERNIGHT 4 Pin LED Strip Light Connector Kit - Extension Wire, Solderless Connectors, Strip to Strip & Strip to Wire Connector, 90 Degree Connector Review

Great idea but doesn't work at all! These clamps suck wire, it's a wire and works as such, but the clamps are so complicated it's not worth it.

Theoretically, I liked these plugs very much, but when assembling them, they didn't fit me. First, they are designed for waterproof LED strips. The contacts pierce the bar from behind, for this the mechanism needs a thick coating on the front. You'll also need to remove any tape near the connection to allow the pins to reach the LED pins. What I liked The wire side worked well and made a solid connection on the 20AWG wire very easily. No problem. Where this connector didn't suit me was on the…

Use: Under cabinet lighting. Like some others I had problems with the 4 pin solderless connectors that plug into the 4 copper pins at the end of the LED strip. I had to go back to the listing after trying to install and finally noticed that the seller sells them for LED strips with a silicone cover. If there is no silicone dome, the orthosis cannot be pressed down from above when it snaps into place. Unfortunately I bought an LED strip which is just bare pins and LEDs, no silicone. So I had to…

I used this product to connect the ends of LED strips together on the back of an open bookshelf. It turned out well in the end, but the process was difficult. I bought this kit for two reasons: firstly, it had a reasonably sized four-wire cable (10mm) and secondly, it was a solderless LED connection kit. The first part turned out great - the wire was the right size and worked well in the end. But the second part turned out to be TRASH. Solderless connections just didn't work with my LED strips.