Enhance Your Car Audio with Crux SWRAD-55 Radio Replacement Accessories Review

Not all of my steering wheel buttons work as they should. The volume works and channel switching, but not the mode or call buttons. Damn

This is not plug and play for c5 allroad. I also had to solder it into the factory wiring, the kanbus is junk. When the machine is half running, there will be a loud clicking sound when the machine is turned off. Steering wheel controls do not work with Pioneer Head navigation unit. Does not have connectors for factory installed pluggable navigation/car phone accessories. I half believe it doesn't even work. The main unit needs to be turned up to high volume to have an adjustable volume level…

I bought this wiring harness to install an Audi A4 B7 without Bose. The problem with this setup is that from most reviews the amp seems to be expecting 6V line-to-line, while most head units supply 2V. So once your head unit is installed it will most likely provide the correct output with the speakers. However if you connect the line out for your rear speakers to the factory amp you will get a very weak signal as the amp expects 6V but your main unit is supplying 2V. There are other harnesses…

The device was integrated into the Audi S4 and I managed without much trouble - I used crimp connectors to bridge between the wiring harness supplied with the radio and the CRUX component. When I originally used steering wheel controls, the left scroll wheel changed channels to XM, terrestrial radio, and tunes to media. The right scroll wheel changes the volume, just like the original radio. About two weeks later, I accidentally changed the function of the left and right scroll wheels…

This is not plug and play for c5 allroad. I also had to solder it into the factory wiring, the kanbus is junk. When the machine is half running, there will be a loud clicking sound when the machine is turned off. Steering wheel controls do not work with Pioneer Head navigation unit. Does not have connectors for factory installed plug-in navigation/car phone accessories. I half believe it doesn't even work. The main unit needs to be turned up to high volume to have an adjustable volume level…

I bought this wiring harness to fit an Audi A4 B7 without Bose. The problem with this setup is that from most reviews the amp seems to be expecting 6V line-to-line, while most head units supply 2V. So, once installed, your head unit is most likely providing the correct output to the speakers. However if you connect the line out to the factory amp for your rear speakers you will get a very weak signal as the amp is expecting 6v but your main unit is supplying 2v. There are other harnesses that…

Device integrated into Audi S4 Worked for me without much hassle - I used crimp connectors to connect the wiring harness that came with the radio and the CRUX component Originally used steering wheel controls, left scroll wheel changed Channels on XM, terrestrial radio and tunes on media. The right scroll wheel changes the volume, just like the original radio. About two weeks later, I accidentally changed the function of the left and right scroll wheels, apparently by clicking the scroll…