🔧 Tabweld KECO Gray PDR Glue Sticks (10 Pack): Superior Adhesive for Automotive Paintless Dent Repair Review

The stuff had amazing grip and I've used it for a few other things and it's perfect. Keep in mind that these glue sticks are a lot thicker than regular sticks, so make sure your hot glue gun will accept them. I would definitely recommend them to anyone doing PDR at home.

I used these to try and dent my FMF titanium tube. It does not work. That wasn't because of the glue sticks, though. I literally put my feet on the pipe and pulled those sticks HARD, very hard. They held on. The dent is just hard. Spring. I just warmed them up with a heat gun and the glue immediately came off the tube.

I can't expect the glue to come off easily even if the glue was good. But the question was that the glue could be easily removed. I made three or four good hits and the sound came out fine. Uses a plastic scraper to remove the glue; I tried methyl salicylate diluted with distilled water, it worked a bit. But isopropyl alcohol worked best. Isopropyl alcohol is hard to find these days.

I am new to this art and have used 2 other brands of (cheap) glue sticks before making a messy mess that could only be removed with steam. I spent 5 minutes deleting each tab after each click. These tabweld sticks are as good or even better than what you see in each video, they literally come off in one piece with multiple sprays (I used 91%). Tabweld PDR glue is the only glue I will ever use, I do not recommend them. enough.

Pretty Nice Outdoors should be hot and your seat if your mount got hot from the sun it works damn well with the traction I had but only works really well with one of the parts provided, but the day was quite chilly in winter but when the sun came out and git is a bit warm and very hot i worked better and was able to remove almost 90% of the dents thanks saved a lot of money even if it's not perfect, just because that was hit

I was struggling to get the dent pulling power out of my regular glue sticks. I saw that they were used by professionals and ordered a set. They were longer than I expected, 10 inches long, which was good as they aren't cheap. Hot glue works best with a high temperature glue gun (these are 7/16 inch diameter sticks) and a 10 minute cool down time in an 80 degree Fahrenheit ambient temperature. Pull and stretch the adhesive until they separate. In one case I had to use rubbing alcohol after…

I'm new to PDR and have a lot of free time and attitude. I bought a multi-piece PDR kit which looked like a decent starting point. After about a dozen moves with this setup, the weak links in the set were easy to identify. The glue gun and glue sticks were dirty and difficult to remove due to the poor adhesion of the petals. I got a new glue gun and these glue sticks. From the first move I knew I had made the right decision. I was working in direct sunlight on a 75 degree day and it worked…