Universal 2-Button Garage Door Opener Remote - Compatible with Chamberlain, LiftMaster, Craftsman, Genie & More - Clicker KLIK1U 375UT 373LM 973LM 893LM 893MAX Replacement Review

This worked on an old model DIP switch and a newer (circa 2013) camera with a purple "learn" button (I programmed a button on the same remote and it worked!). It didn't work at first, but that was because I didn't read the instructions fully. When I went back and re-read them, I found that my model's master had to flip the DIP switches. Once I did that, it worked great. I'll buy a second one!

Doesn't work. I've spent a lot of time trying and repeating each compatibility setting (which takes MANY clicks) and it just never worked. I swapped the DIP switches, tried reverse, etc. Then I finally gave up and ordered another brand that was cheaper and looked better. And guess what? It worked right away! No drama at all. Aside from the outside, it seems to work exactly the same as having the exact same inside. Only the other works!

When I received the remote control and read the instructions, I was a bit worried because it wasn't compatible with the Master. Same goes for the photos on the listing, but thought I'd give it a try anyway. I went into the garage, removed the battery cover from the remote and held down the black learn button until the light came on. Then I pressed the learn button on the garage door and continued pressing the button on the remote that I wanted to program. You press, then wait for the light to…

For a while now I have been trying to find a remote control for our side gate that will actually transmit successfully over long distances as I am having trouble with multiple buttons and the old 'clicker' " style had . Remote controls from my car when I'm in front of the gate. This little remote was a real godsend as it works reliably and over much longer distances than other remotes. My gate is just a 10 switch dip switch and it worked fine. Note that you may have to flip the switches in the…

Matches the top door perfectly! To be honest it works better than the original! Very easy to program and just works! The instructions were ok, but you can tell that it is a translation from another language. The buttons have a nice click and the blue light is a great touch! Much better than the factory original. The original has 3 buttons and you never know which one will work, I swear it changes every time 🙄 But this one lets YOU decide which ones to program and then it just works every time!

I haven't had a working remote in years; never thought of snagging a few on Revain until now. My biggest problem was figuring out which "color" to buy because my purple button had lost all of its color. They arrived within 2 days and I programmed both on both of my doors within seconds. Buttons are too easy to press. I suppose there shouldn't be a problem putting the visor on, but I had one in my pocket, I barely brushed my leg and it worked. The next step is to see if they work to program my…

Too bad to buy a universal garage remote that doesn't work. Luckily I found the instructions in another product review. VOILA! 2 buttons - 2 different manufacturers. It worked like magic. If the included instructions don't work for you, try these. Basically, the remote control must first be prepared before it can be paired with the garage opener. These instructions worked for 2 vintage garage openers: Genie/Overhead and Chamberlain/Liftmaster (Red).1. Remove the battery cover from the remote…