V4INK 1PK Compatible DR-620 DR-520 Drum Replacement for Brother DR520 DR620 Drum - HL-5250DN HL-5340D HL-5370DW MFC-8480DN MFC-8690DW MFC-8860DN MFC-8890DW DCP-8060 DCP-8065DN Printer Review

The drum was otherwise fine, but the paper and tape that was put over it (presumably for protection during transport) made the tape stick to the roller and left a sticky mark on it, the are everywhere now The printed page is ruined (leaving smeared toner on the back of the page and big smudges on the front where the toner isn't sticking where it should. Otherwise the product looks like it worked great but it's a pity to replace a bad drum, hoping for an improvement in print quality, just to get

I was a bit hesitant about this purchase as this DR620 drum cartridge is 1/5 the cost of the original part for my 9 year old Brother MFC-8680DN. I had lines along the edge of my printed copies that the cleaning procedure failed to fix. It looks like I had 53,000 pages on the original drum, and according to the manufacturer, 25,000 pages is normal for a drum! In any case, the new "compatible" part will be installed according to the procedure described in the user manual. The print quality seems…

I have an old Brother Laserjet in class because I let students print to their laptops via USB. The biggest problem I've had over the years is the drum as I usually get really bad streaks on the edges of the paper after about six months. It's time to replace the drum and you've decided to switch to another non-brand. After about two weeks and over 100 pages printed, I had no problems. It works just like other brands and drums and just like Brother. Again, the biggest problem is usually streaks…

I am very satisfied with this compatible printer drum. It's very quiet (no squeaks or squeaks) and I've got duplex printing back too. Also, I have not noticed any difference in print quality between the original (1 year old) toner/drum assembly and the new toner/replacement drum assembly. By the way, this is the third drum I've replaced in this printer in the last few years. Two of the replacement parts were compatible and one was a Brother OEM. The OEM worked fine, but the previous two…

This turned out to be a poor choice for my aging drum. The product was cheap and readily available, but the quality of the product was far below acceptable even for everyday use. The paper looks "marbled", not transparent. The drum appears to be dirty with toner, but the toner was replaced at the same time (using an OEM product). The old toner cartridge gave the same result, but the old drum did not. The old drum before replacement provided better print quality. I will continue to use the old…

I bought a factory refurbished Brother MFC-8690DW all-in-one printer for home use in 2014. I probably only printed less than 500 pages on it. It was working very well until recently the printer stopped printing and displayed an error code due to a drum failure. No matter how I delete and reset, I couldn't get it to work again. The printer always stopped printing after the paper went through the toner and stopped in the machine when 2/3 of the page was covered with black loose toner powder…