ARHIKY Red Heat Transfer Vinyl HTV Roll for T-Shirts - 12" x 15' Review

Reading the five star reviews only tells me they never tried a better product. Can't believe someone actually states this stuff is THICKER and BETTER. Are you kidding, or just a faked review ?!?! For comparison, just tried another brand for a test . Set the Brother ScanNCut SDX125 to half cut, auto pressure. Perfect results. Clean cuts, decent weeding, everything that needed to be in place, stayed in place. Then we went back to this roll. OMG. Test, test, test, finally at FULL cut -6 pressure…

Cheap enough for practice and make tons of stuff. I think it's a little thick on a shirt but it's ok. easy to work with and weed. Made a bunch of stuff for myself and kids and have plenty left and what I made has lasted through the washer several times. Reminds me of jersey lettering on sports uniforms. Just have to set the blade a little deeper (brother scanncut at a 3-3/4 w 2-3 pressure)

I ordered 2 rolls of this black htv. I don't think one can have enough black htv vinyl in stock.One thing I did notice was that one roll was about 2.5" shorter than the other.about 12' instead of 15'.I costumed 40 tote bags on both sides for our local catholic church or a group visiting the Holy Land for a week. The group later shared that they received many compliments on the design and color of the logos.I also customized a few shirts for a birthday party. I used this black htv and the white…

To me this HTV is different from the others out there, usually it is shiny side down for HTV, i tried that and it cut thru the carrier sheet,which stinks for my blade, then i tried it shiny side up which put the carrier side down,and i used heat transfer smooth and i picked 2 passes and it cut pretty darn goos,there will be a fwew places it didnt cut ,bu that could happen in with any HTV, i have used cricket and they washed and dried good, maybe i should review after a washing, i hope al will…

This vinyl is wonderful! I was in a bind & needed it for a project as soon as it was delivered; so I opened up the box to find it was cold peel. My first experience, but no big deal- this thoughtful company has a full size page front & back of very thoughtful directions on cutting, ironing, etc. They miss no details which made me super confident I would have no issue. It’s a bit tricky to figure out which side is the "face down” (transfer sheet side) as neither are very shiny, but it literally…

I was in a pinch and needed some vinyl ASAP, so I ordered this and received it the next day. It’s decent quality and worked good for the project. I did have a small issue trying to cut it properly with my explore air 2. I ended up getting a perfect cut setting it on glitter heat transfer vinyl. It ironed on without any issues. I would definitely buy it again.

I have my own small business and had the wonderful opportunity to use this vinyl for a few of my products. I'm one to buy name brand first but had to try this for the price and feet wise that came with. Let me tell you, you wont regret it. Not for its price. I will warn you, weeding was a little slower because the paper felt a bit stickier, but nothing that would be a major effect, or make me take off a star. I used my easy press at 305 for about 20-25 seconds total for the whole designs…

With this vinyl, it's hard to tell which side is for cutting if you don't know what you are doing. To tell which is the cut side, it's the duller matte side. But you can also take a weeding tool and raise the corner just a tad. The side the vinyl raises up on is the cut side. You want that facing up on your mat.Settings: This vinyl needs a deeper cut than the regular vinyl iron setting. I used Glitter Iron setting and it cuts really good.Applying your design: You should set your heat press at…

I first ordered the white HTV and used it several times -I was very pleased with my results. Once pressed onto the shirt the white was so soft and flexible it was as if it was part of the shirt itself. Since I loved it so much I ordered the black HTV for my next set of projects. The difference in the two products were shocking. They both came in identical boxes and rolled nicely, but that's where it ends. The first difference was the black came on a sticky carrier sheet where as the white did…

I am new to vinyl so I have used only the sample packs and single sheets of black vinyl and I am giving this product 3 stars for one main reason. It is not very good at detail. I had some small letters about 1/4" to "1 1/2" that had to be hand pulled from the sheet while weeding. I tried 3 different depths on the Air 2 and all (3) failed to yield positive result. I had one design that I had to leave the small lettering off because it was such a mess. Also, anything smaller then 1/4…

Came fast. It’s very hard to tell which is the cover sheet side and which is vinyl. If you try to cut using the settings on the box it comes in, it won’t cut right I had to cut mine or glitter htv settings in order for it to cut through it goes on the fabric very nicely using a heat press I wish it came in every color instead of just black and white bc I’d buy them all. The pricing is good

I received this order within 2 days. It did not come with the teflon as advertised. I usually use Siser HTV, but decided to try this HTV because of the price. I used the Cricut Maker for cutting. I cut off 5" x 12" to practice on. My first two pieces, I used the iron on setting, which on the cricut maker is set at 118. This did not cut through the vinyl even on the "more" setting. I then tried the heat transfer setting, which is set at 219. This worked great. It was more difficult to weed than…

So this product is definitely a value! I was looking for enough material to complete shirts for 30 8th graders and came across this item. At first, I wanted to trash it! After creating a design on my Cricut Explore Air 2 and cutting it on the "iron-on" setting, I could not tell where my design ended. Trying to cut off the excess vinyl was a complete nightmare! I cursed profusely and wanted to just give up. Then I had the idea of cutting on a different setting. At first I chose cardboard for the

This is the second HTV I bought from this storeThis HTV is packed very well, it's packed in a box, the box is beautiful, the HTV is protected, I like it.I will use Silhouette Cameo 3. I will adjust the parameters to: Blade: 1, Speed: 8, Force: 4. Pass: 2. It is very easy to discharge waste, and it is a little sticky. The viscosity is not that strong, which is just right. Keep in mind that an old/well used blade may require higher cut settings than a brand-new blade.Use a certain amount of…

I ordered 30 feet to fulfill a t shirt order and was very happy with the product. The Teflon sheet was missing. I chalked it up to an oversight and wasn't concerned as I had plenty already. I was so happy with the results, I ordered another 10 feet. Still no Teflon sheet. A bit disappointing, but I am very happy with both the product and the cost. I'm going to order another 10 feet after I post this, but this time I won't be expecting a Teflon sheet

I have tried and tested including hand washings Arhiky and the more familiar higher cost brands of brands of HTV, the Arhiky HTV matched the higher priced brands. They make it easy to use buy labeling the box with clear cutter and application settings and it's hot or cold peel. The downside is it had a heavier carrier then some brands and weeding can be a challenge in a cool room, it weeds best when at least 75 degrees F, I weed it on my heat press or a regular warming pad under my mat. Also…

I have made several T-shirts so far. The weeding is super easy, and minimal. The backing peels easily and does not tear the design or lettering. I have only used the Cricut brand before this, so I was a little apprehensive due to how much you get for suck little cost, I was worried it would be cheap quality, but it was exactly like the Cricut brand, except this vinyl transferred much quicker and easier. It took only a few seconds of heat from a $10 iron to transfer. I'd like to upload a pic…

This vinyl is AWESOME! I have ordered this vinyl in white, black, and red. I have had fantastic results with all three colors! It is super easy to weed and irons on well to the t-shirts. The t-shirts and items I create are for my students, staff members, wrestlers, friends and family. I give them as gifts and quality and price are important to me. I have purchased more expensive heat transfer vinyl which I do like but can no longer afford. I have been extremely satisfied with the all of the…

I was excited to read good reviews and try this value roll of vinyl. I got it, read the directions and went to cutting. YOU MUST FOLLOW THE EXACT INSTRUCTIONS or you are going to mess it up. YOU MUST HAVE A NEW BLADE IN YOUR CUTTER, because tweaking the instructions will TICK YOU OFF! I thought maybe I got a bad batch or something, but nope. I emailed the company and told me there is nothing wrong with their product that I needed to follow the instructions. Uhhh, ok?The vinyl is finicky. So, if

Great value for price however the tact isn't sticky enough for tiny details/letters, they will come off the mask when trying to press. and you can't use deep setting at it is too thin and will cut through the mask. but came fast and perfect vinyl for larger designs- can't beat price