Water Cooling System for Arctic Liquid Freezer II 420, Black/RGB Review

Make sure that the dimensions of this turntable are taken into consideration. I had no choice but to get rid of the old case and spend the better part of two days looking for a new one that would accommodate it. Let's throw on some Lian Li Lancool III, shall we?

A large radiator, not every mid case will fit this contraption. In the case of Lian Li lancool 3, the radiator fits clearly along the height of the entire front panel Includes mounting hardware for LGA 1700

I do not want to attribute this to the shortcomings, but the size. If you choose dropsy, please note that this thing is very large. Doesn't fit in every case

Non-rotatable tube connections create inconvenience during installation, but minimal risk of leaks. Bulky, you will need an appropriate case.

When I installed it, it turned out that one memory chip burned out, that's a coincidence. How did you know? With any pop on the system unit or lid, the system hung and the memory problem indicator lit up, and found out by enumeration. Pros: Cools chic There is a mount for 1700 intel Huge, powerful Not a fan of highlights, but here she is gorgeous Cons below: The tubes are very tight, they rest against the wall of the block Initially set to max speed, so I found out that it was quite noisy, put…

It's been more than a year since I started using the cooler, and the computer continues to function normally at least 12 hours per day, seven days a week. Even in my nearly open Thermaltake View 71 chassis, the cooler operates with no audible noise (of course, this requires the appropriate settings to be made in the BIOS). The temperature of my 9900KF never goes above 60 degrees, even when it is being put through its paces in demanding games, and it makes no audible noise all. When playing…

Even if the jobs I do on a daily basis aren't extremely taxing, the 7800X is stable at 4.8 instead of the original 3.5. While it was 4.5 with the Noctua D15, it was 4.3 with the Kraken X52. Various advantages: There are a maximum of two or three unattended CBOs available in the 420 form factor. I chose this one because, based on the photographs, it appeared to be more dependable than its analogue counterparts in terms of the substance that the tubes were made of. In contrast to radiators…

I have a complete tower case, and I figured there wouldn't be any issues with it fitting, but there are. The motherboard caused interference, and the thickness of one of the coolers prevented it from fitting. I was required to take out one of the coolers. I'm going to reattach the cooler that was removed before. I have put my i9-9900k through a series of stress tests, and the highest temperature it reaches is sixty degrees. When I played Hogwarts, I had similar results; these temperatures were…

I had a lot of trouble installing this bandura in Fractal Design Define R5, but I finally got it done. It was necessary to relocate the CBO radiator closer to the side wall with one edge in order to accommodate the fact that the rear panel on the motherboard is housed in a casing. If there hadn't been a case, I believe the radiator would have stood up as it should have. As a natural consequence of this fact, the vast majority of the radiator's threads did not correspond with the holes on the…

Fractal Design Define R5 Case Integrated Because there is so much information online that does not apply to my situation, I will provide a brief overview of the installation procedure. placed atop. Screws and baskets were taken out. To prevent them from interfering, I connected a coupler to the wires before I bent them under 90 degrees and laid them along the vertical rack. Dropsy was taken inside, and the case was secured with four medium screws placed slightly offset to the left door (left…

In most cases, I agree that anything bigger than an LF-II 240x280 is unnecessary. Gains of 2-3° in t° might be expected. Based on those case facts (NZXT H630), I went with 420, even though it ended up costing me 1200r more than LF-II 240. Benefits from: - At least on the KU, the pricing is 1200r higher than the 240mm alternative. And the cost is often under $7,000 for all shipments. There is no way to find another 420mm dropsy at that price. - Discreet and effective. In my perspective, there is

From the 4th revision there is a mounting kit for lga1700, or you have to buy it separately. For some motherboards, you will have to unscrew the small casing from the pump, all models of these motherboards are listed in the manual. Comes with thermal paste. Some pros: The best in its class. A fan is installed on the pump to cool the processor power circuit. Some cons: Not every case will be installed, you need a large case. In Corsair 7000d climbed right up to the top

I put it in Phanteks 719, it stood up like a glove, the cables don’t stick out, the speed doesn’t jump, it’s barely audible under load, i9-10850k cools with a bang

I had to sweat to shove the cooling system into the Fractal Design DEFINE 7 Black, and the fans rested closely on both the memory and the shroud with motherboard connectors, and I had to remove a number of parts in the case. There are only a few cases, expensive and very large, where this cooling system will fit without any problems (for example, Fractal Design MESHIFY 2 XL Black). The small fan turned off immediately, since there are complaints about it on the Internet, since it is simply…

It copes with its task perfectly, my 5950x has the hottest thing I have seen is 69 degrees at 70% of rpm. Phanteks Enthoo 719, along the length there is still room with a margin, but the case itself is not designed for such a radiator thickness. With my Aorus x570s pro ax motherboard, I got right up to it, and despite the fact that I specifically took the RAM from the hooper he, because they are now the only low-profile dice on the market, the distance from the radiator to the RAM is about 1mm…

For a long time I was looking for information about the cases in which this dropsy will fit. As a result, I settled on Thermaltake Core X71 for 13 The dropsy got into it vertically on the front panel, with the hoses in the upper position, and the processor turned out to be the top point, which is not good. I think to embed an expansion tank into the return gap if I find the composition of the liquid suitable for this model. Although this, of course, will bury the guarantee.

The box is strange - triangular. There is no instruction in the kit, you have to look at the official website, but it is buggy on my phone. Thermal paste included MX-5, the volume is sufficient. The mother has a PUMP connector - it turned out that you don't need to use it, otherwise the fans will run at 100% speed without speed control, only a connector for the CPU. Installed in the Fractal Design Define 7 XL case without any problems - to the top cover of the case, there is still some free…

Really huge, be sure to see if it fits your body. Installed in Phanteks Enthoo Evolv X, got up without problems, but you need to install it first. Ryzen 7 5800x3d cools without problems, with a large margin.

Expected more from this dropsy. I'll change the bags to be quiet, we'll see, and so the average system. I did an undervolt of the processor, otherwise it flies to 95 and trolls (with working applications), in games it's normal.