Weirun Kitchen Bathroom Sink Faucet Water Filter Diverter Valve with M22 X M24 Connector - Polished Chrome Review

I used this faucet to provide hot water to an existing bidet that uses a 1/4 ID hose. I later found that my hose was too big and not suitable for this device. I came up with several solutions and chose the simplest one by using a hose clamp after fitting the hose onto the threads and securing with a hose clamp. Be sure to check the pipe size required before ordering.

This adapter is beautifully made - on the outside but I couldn't get a good seal on the faucet. When I did it was still dripping. Fitting a 1/4 tub was excruciating and I couldn't use the original nut as it didn't match the hose fitting. The more I use it, the less it drips, but I don't get such a nut again. I will try to get one from the company that made my water filter. Hope it gets better.

I bought this to replace the drain for my New Wave Enviro Premium 10 Stage Water Filter System desktop water filter which I have had for 15 years! Eventually the original outlet tap wore out and began to leak. This Weirun water filter bypass valve for kitchen, bathroom and sink faucet is perfect without any problems. I actually like it more than the original because of the toggle button. I highly recommend it.

I got this for a jug water filter. Looks well made. Fits perfectly in just minutes. Has a 24mm female thread but also comes with a universal 22mm or 24mm male adapter if required. Additional washing if necessary. No leaks! The handle is either on or off. No automatic return when water pressure is turned off. The handle was stiff at first, but quickly came loose. You can always add a drop of vegetable oil. I liked the added security of having a nut that can be tightened 1/4" of the water supply…

I replaced my old bypass valve with this one and wow what a difference. The old valve came with our water filter and had a value in the form of a push/pull pin. Over time, the old value began to fail, the water pressure in both the kitchen faucet and the water filter dropped (the pressure was reduced from day one, but it only got worse), and water entered the water filter when you didn't were I don't use it. From the moment I set this value, the pressure was fully restored and I didn't get any…

I read other reviews before purchasing this diverter and many of them said it was difficult to install without leaks. Having had some plumbing experience I decided this would not be a problem for me. I was wrong. The valve came with a washer and an extra washer. I tried it first with the one already in it, but my sink only has a couple of open threads to screw the valve on, and the single washer wasn't thick enough to fill the gap, so it leaked and dangled. I figured an extra washer was…

Ok, bought although missing some specs and I was very lucky. Now I'll share what I found out (along with a general one Review) First, it fits the 55/64 27 male thread faucet, it just screws on, no need to use the adapter that comes with it unless your faucet requires a male part (thread only).Use a washer or it will leak and tighten properly. As for the part where the hose connects to drain the water, that's the big confusing point on this list. tight and also what OD hose is needed, as it has…