Welding machine Elitech AIS 200SYN (MMA, MIG/MAG,TIG) 220V 50-200A(MIG), 10-160A(MMA), 10-200(TIG) Review

I bought it, as they say, almost the last one (I managed to catch the outgoing train) today it is out of production, but you can look in third-party stores. IMMEDIATELY I will indicate in the official store they provided me with everything and the box was sealed with an ELITEKA seal, there were also additional items in the box. rollers and extras. nozzles. Therefore, the claims of the official store if you bought directly are stupid to write, since the reputation is above all, and if you got…

Cooks great. The mask and the hammer are for children, for the child to play. It would be better to put a hose for gas supply. And as wishes, it would be nice if the table of welding modes were applied to the body of the apparatus for beginners. This roller is suitable for flux-cored wire - "PATRIOT wire feed roller, 0.8 / 0.9 mm for flux-cored wire machine WMA 205, 225MQ"

I bought Vremya TV in IM (online store) for 19,465, they are also a separate issue, the return is very hemorrhoids - only upon request within 21 days and only a refund, although the store itself announced a 7-day guarantee from the IM itself, the question Why such a guarantee? And so about the inverter itself. The build quality is disgusting, the handle of the euro-connector of the semi-automatic torch sleeve is very flimsy, just snotty, crumbles when you tighten it. The framing of the sleeve…

In general, I liked it. There are functions that are not written in the manual + there is no information on the net, the manufacturer decided to keep silent about them. I agree with the comments to make the mass wire longer instead of a masquerade mask and a kind of baler, and fire the marketer who suggested equipping the automatic machine with them. Elitech ay, make a complete manual and an overview of setting up the device's functions in a video. The pro will not buy it, but it will be useful

This is for a summer house and a garage. Then you have to modify the wires a little, although they could do it right at the factory right away, but it would be more expensive, but then you don’t have to rack your brains .

Before that, there was a fubag inverter semi-automatic device, then it seemed to me that it was just a fairy tale. When I bought this one with synergistic control, the difference is simply huge.

I chose the device for a long time, I settled on this model, since I am a beginner, an important point when choosing was in setting up the device. I am very pleased with this purchase, the device is just super, it cooks very well with both wire and electrodes. I recommend this machine for a beginner.

Overall, not bad. Pros below: Very easy to use, well made device. At current prices, there is no equal. Different cons: Cables for MAG welding aluminum, shield and brush about anything.

Sharing my insights with you.Some pros: Build quality, ability to weld with flux-cored wire Has some cons: I didn’t understand how to put a 1 kg coil and is it possible

brought in one day to Hong Kong to the house safe and sound my opinion Apparat adequately cooks just rustles mechanism iron fan works pleasantly without noisy excellent product Has pros: The device cooks in any modes of bombing MMA welding just surprised Minya softly welds a wide range of VRD mode with its task in wet weather also in the MMA mode, the inductance of the regulator is from -10 to + 10 Arc force works great mig mag welding welds excellent welds perfect body metal welds excellent…

I am not satisfied with the lack of spare parts for this device and the complete lack of technical support from the official representatives of Elitek.

For beginners in welding, the SYM function is very good (by default), but there is also a manual setting of parameters (apparently for the pros already).

An excellent device for a beginner, the settings are clear. A professional welder appreciated his verdict: "It cooks great, I want one too! "

Pros below: Manufacturing quality. All-metal wire feed mechanism. Synergistic control (to adjust, just select the thickness of the metal). Set for MMA welding. Modes for TIG welding. Has some cons: MIG / MAG from 50 A, which is supposedly too much for thin parts (I'll check). TIG torch must be purchased separately (I grumble, almost everyone has it). Mask included for laughter).

I managed to test so far only on a wire with flux, it doesn’t turn out very well, it sprays a lot and the seam is bad. True, I am no welder. I met advice to use a wire with a diameter of 1 mm, and it seems to suggest itself, since when welding with a diameter of 0.8 mm, it is felt that there is little metal on the seam. But I haven’t found where to buy a 1 mm flux-cored wire yet, we don’t have it in the city, and with a cursory search on the Internet I also didn’t find where to order it.

Its pros: The versatility of the device, the reliability of packaging, cost, delivery. Has some cons: kit from the manufacturer - useless welding mask and brush, short cables for MMA welding.

The review turned out to be about the phone, but the welder, however, is very good in terms of tactile sensations! Spent 1kg of flux wire. . only positive emotions - not a single burnt hole, almost no sparks, not much smoke I swam like P / A in the first place, so I haven’t poked anywhere with electrodes yet In general, I recommend to buy Py. Sy. For flux-cored wire, you need to purchase roller, wire was taken by edon "- cooks well

In general, I recommend. I'm canceling the race for the lack of a key, for nozzles. Pros below: Until I tried it in work, I'm waiting for the onset of heat. I'll work and write more. Obvious pluses are the ability to work both in automated mode and manual settings. Iron mechanism, wire broaching. Wires, if not copper, then at least not made of iron. Clear control logic. Wide wire range (0.6-1) I liked the reverse polarity solution, no stupid tail Thick cable, I wonder if the same wire is there?

Pros: MIG torch 3 meters. Automatic settings (synergy). Possibility to install wire spools D100 D200 (1kg and 5kg) Some cons: Instead of a toy mask with a hammer, it would be better to include a gas hose in the package.

In the MMA mode, unfortunately, although it is written that it can cook at low voltage in the network, but even with a voltage of 200 volts, dances with a tambourine begin, the electrode simply sticks, and as soon as it ignites, there seems to be a lot of splashes in the mask, but the bath is not visible, and when shake off the slag - there is a scribe! I immediately rearrange this electrode into the old resant and . "earth and sky" In the MIG mode, flexible settings for both supply and…