Westar EM 2827 Engine Mount Review

Bought this mount to replace my crumbling "frown" anchor which didn't even last 2 years. I don't do many miles in my car (40,000 in the 9.5 years I've owned it) so I expect to live on something like an engine mount for a few years. The anchor I replaced was the second one I bought that didn't fit right out of the box - the frame's bolt holes were too far apart, forcing me to modify the mount just to fit . Such a pain! This mount has solid rubber construction (no scowl) and works great. I…

Greetings. I installed this in my 1999 Saturn SL2. (If you have double overhead I think you're fine.) The install took longer than expected. I used a 15mm deep socket for all 7 bolts/nuts. (Yes 7 and yes nuts and bolts.) See Richpin06 or something like that. He suggests loosening/retightening the bottom hook and his reason makes sense. The engine bolts on top were rough. I would recommend the bar. I used a 3" extension and a pair of gloves. (Along with liquid wrench, PB Blaster (much better…

I have an SC2 and have driven 400,000 km since the release. This will be my third engine mount. The first was torn apart, the second - "gloomy" support from Saturn, which did not fall apart, but settled and transmitted a large vibration to the car in the range of 2-3 thousand revolutions and at idle. He seemed pretty solid. The motor didn't wobble back and forth, but you should measure the air gap in it to see if it failed and failed. (about 2mm) It's not a crooked mount, it's solid with…