XPG Caster RAM 32GB (16GB x 2) DDR5 6000MHz DIMM CL40 AX5U6000C4016G-DCCAGY Review

Inside Samsung B-die (just don't think that they have anything incommmon with DDR4 chips under the same label). Voltages up to 1.45 volts are really easy to digest, but you still can’t take a frequency above 6400 MHz, in principle, the memory does not start at 6600. Timings, however, can be squeezed quite well, although also without records. Read more: ? v=MdhHAY6KBbY

Absolutely every penny invested in this RAM pays off with the amazing performance of these bars. Due to new technologies, the RAM has low power consumption, so it does not heat up even in the most terrible stress tests. Well, the clock frequency of 6000 MHz is now perceived as a fairy tale.

I decided to choose these bars so that the PC would pull all the new items for a longer time and I would not have to think about hardware upgrades. Pros: They work at 6000 MHz. Suitable for hogwarts. Legacy prerequisites Do not heat up, despite the high clock frequency. Has cons: Launched at 4800 MHz. Capricious Low potential for overclocking, unless the voltage is increased to 1.4 volts.

I decided to choose these bars so that the PC would pull all the new items for a longer time and I would not have to think about hardware upgrades.

If your HMP profile is unstable, raise the voltage from 1.35 to 1.4. And all will be well. On many motherboards 1.35 is not enough. In my case, I didn’t want to work stably with the Asus Prime s690 motherboard.

The RAM works stably at 6000 mhz with good timings. Therefore, even overclockers should not drive it. Although she is chasing, it's not worth the risk, since the radiators are designed for a specific value that limits heat dissipation. How it will behave when overheated, no one can tell you for sure. But in which case, handing over XMP memory later under warranty in this case will be problematic.

I have an MSI MEG Z690 Unify-X mother, the bars work like a Swiss watch. Even the ability to overclock to 6800 MHz is with a voltage of 1.41 volts.

I bought this RAM a month ago, the impression is generally positive. Focused on ddr5 in the first place, secondly, at a frequency of 6000 MHz. I took it for video processing, so I can’t say how much FPS will increase in toys. But rendering now takes one and a half times less time than with 3600 MHz RAM (probably, the processor cannot use the full potential of the bars).

Has some pros: Price - 24 thousand for 32 gig DDR5 with a frequency of 6000 mhz just a gift The bars are not high, the CPU cooler does not overlap Its cons: There are very few of these kits in stores at the moment (June 2022)